THE PRINT COLLECTION
Fantasy
14 designs to explore. Find your next object, tabletop companion or useful little invention.
Boxes & storage / Keepsake boxes / Fantasy
Library of Alexandria box — a magnetic box under the great dome
The Library of Alexandria as a box: a white-marble hall behind an arcade of pointed arches, a full-width stair, four turrets under gilded onion domes and a great ribbed dome on a chevroned drum. Everything above the cornice is the lid, and eight Ø5 × 3 mm magnets buried mid-print hold it shut. 118 × 96 × 113 mm outside, 90 × 60 × 45 mm inside. Six STLs, two prints, no supports, no glue.
Boxes & storage / Keepsake boxes / Fantasy
Castle keep box — a fortified keep that opens at the wall-walk
A 112 mm square castle keep whose lid is the wall-walk: lift the battlements, four corner drums and their tiled conical roofs straight off and the keep is a 70 x 70 x 64 mm box. Two prints, no supports, no hardware, nothing to glue. The lid rests rather than latches, so it is a table box, not a travelling one. Multi-colour for the AMS, and it still reads as a castle in one filament.
Boxes & storage / Keepsake boxes / Fantasy
Coffin Pencil Case — Magnetic Box with a Death's-Head Moth Lid
A toe-pincher coffin box for pens, markers and brushes. The lid is held by six pairs of hidden magnets buried mid-print, so no fastener is visible anywhere. Prints flat, no supports, one colour or two.
Boxes & storage / Keepsake boxes / Fantasy
Elven Motif Keepsake Box — vesica plan, interlaced vine walls, two-colour leaf inlay
A pointed-oval trinket box where every ornament is the same shape at three scales: the box plan, the leaves woven into the wall braid, and the veined leaf inlaid in the lid. The wall vine is a genuine over-and-under interlace, not two sine waves. Two printed parts, no supports, no hardware, no glue — and the two-colour lid costs about 1 g of purge because all the ink sits in three layers.
Boxes & storage / Keepsake boxes / Fantasy
Elven seed archive — four-colour drawer box, pinned roof, no glue
Four-colour elven drawer box, 240 x 200 x 70 mm closed, with a scalloped leaf roof, arched tracery windows and a full-width pull-out drawer. Three prints plus four friction pins, no glue, no supports, no hardware.
Boxes & storage / Keepsake boxes / Fantasy
Grimoire Box — a hinged spellbook with the magnets sealed inside
A leather-bound tome that opens on a real barrel hinge. Two sizes, any word you like on the cover, and four magnets that end up fully enclosed in the plastic - nothing visible in any face. Three printed parts, no supports, no screws, no glue.
Boxes & storage / Keepsake boxes / Fantasy
Haunted Castle Magnetic Storage Box
Halloween castle storage box with a lift-off roof, hidden magnets and two printing routes: multicolour or separate parts.
Boxes & storage / Keepsake boxes / Fantasy
Mead hall box — a Viking longhouse whose whole roof lifts off
A 199 mm Viking longhouse whose whole shingled roof lifts off, leaving a 177 x 83 x 31 mm box with the hollow roof above it. Two prints in one wood-fill filament, no supports, no hardware, nothing to glue. Every plank, knot and shingle is cut and jittered from one seed, so it reads hand-built. The roof rests on a tongue, it does not latch, so it is a table box, not a travelling one.
Boxes & storage / Keepsake boxes / Fantasy
Pirate treasure chest — print-in-place hinged trinket box, two colour
A 100 mm barrel-top pirate chest that comes off the bed as one working unit. The piano hinge prints in place, so there is no assembly, no pin to fit and no glue. Two-colour for the AMS: wood planks plus iron straps, banding, corner brackets, lock plate and hasp.
Boxes & storage / Keepsake boxes / Fantasy
Potion of Holding — Twist-Lock Flask Organizer (2 sizes)
A fantasy potion flask that twist-locks apart into a wide-mouth bin with a 4-way divider — four sorted compartments for screws, bolts, beads, pills, or tiny treasure. A friction cork plugs the neck. Two sizes from the same design: a full-size desk organizer and a mini that fits inside a 2.7-inch gacha capsule.
Boxes & storage / Keepsake boxes / Fantasy
Renaissance castle box — inspired by Rosenborg, the whole castle lifts off a hidden tray
A 240 x 108 x 250 mm Dutch Renaissance castle, inspired by Rosenborg in Copenhagen but not a 1:1 replica, that is a box: the whole four-colour castle is one print and lifts off a hidden tray. Almost three days of printing with a four-slot automatic filament changer. No supports, no hardware, no glue.
Boxes & storage / Keepsake boxes / Fantasy
Sugar Skull Box — Calavera Trinket Box (2 Parts, No Supports)
A Day-of-the-Dead calavera trinket box that splits at the brow — the cranium lifts off as a lid. Two printed parts, slip-fit lip, no supports, no hardware. 62 × 58 × 74 mm closed, ~37 cm³ inside. Optional AMS two-colour inlay.
Boxes & storage / Keepsake boxes / Fantasy
Trojan Horse Box — rolling, openable treasure horse
A wooden Trojan-horse keepsake box on real rolling wheels, with a hinged belly compartment — open it to reveal what you smuggled inside. NOTE: the hidden compartment is TINY (31 × 15 × 13 mm) — ring / note / tooth sized, not a storage box.
Boxes & storage / Keepsake boxes / Fantasy
Tudor house box — half-timbered town house whose upper storey lifts off
A 184 x 214 x 150 mm half-timbered Tudor town house that is a box: the jettied upper storey, twin-gabled tile roof and chimney lift off as one lid over a 164 x 194 x 90 mm cavity. Two prints, nine coordinate-locked colour solids, no supports, no hardware.