TAGGED
Household
14 designs tagged “Household”.
Bathroom / Drains
Drain Hair Snake — Barbed Clog Remover
Flat flexible barbed drain stick that rakes hair clogs out of a shower, bath, or sink drain. Push the tip down the drain, twist, and pull — backward-pointing harpoon barbs grab the hair and drag it back out. One-piece print, no supports, no assembly. Finger-loop handle doubles as a hang hook and a stop so it cannot vanish down the drain.
Bathroom / Washing & personal care
Q-tip Cup — Fluted Cylinder with Snap-Fit Lid
Ø69 × 60 mm fluted cup that holds ~250 standard cotton swabs, with a faceted gem-top lid that snaps on with an audible click. Doric-style vertical flutes (24 concave grooves) on the cup, octagonal gem dome on the lid. Two STLs, prints flat, no supports.
Bathroom / Drains
Shower Hair Catcher — Drop-In Cup Strainer
Drop-in cup-style shower / bath / sink drain hair catcher. Open-top cup, fine hex bottom strainer, twelve internal posts that snag drifting fibres. One piece, no hardware, no supports. Parametric — retune for any drain Ø.
Bathroom / Washing & personal care
Soap Dish — Wooden-Slat Cradle, Parametric Wood-Grain
Single-piece slatted soap dish that cradles oval and brick bars without rolling. Five saddle planks carry an oval bar; two flat fenders at each end keep larger blocks from migrating off. Drainage runs straight through the slat gaps onto the counter (or into a tray). Parametric wood-grain grooves on the slat sides — prints best in wood-fiber PLA for a real wooden look.
Bathroom / Washing & personal care
Toothbrush Travel Case — Print-in-Place Hinged Box with Snap Latch
200 × 25 × 25 mm hinged toothbrush travel case. Single print-in-place — body, lid, hinge, and front snap latch all come off the bed as one assembled piece. Fold the lid 90° forward; thumb tab clicks into the catch.
Bathroom / Washing & personal care
Toothpaste Tube Squeezer — Roller Key, Diamond-Knurl Grip
Single-piece roller key for toothpaste / cosmetic tubes. Slot the empty end of the tube through the slit, fold once, twist the body — the tube wraps around the bar and you crank every last gram out. Hang hole at top. Diamond-knurl engraving on both faces for grip.
Boxes & storage / Organizers / Baskets
Lattice Basket — Parametric Desk Organiser
A 15 × 10 × 5 cm open-lattice basket with 45° crosshatch walls, solid corner columns, and a flat rim. No supports needed.
Around the home / Small Tools
Auxetic Grip Pad — Rotating-Squares Metamaterial (parametric, 4 sizes + coupon)
A flat, supportless auxetic grip pad — a sheet of rigid square tiles joined to their neighbours by thin living-hinge necks in a checkerboard, so it has a negative Poisson ratio (nu ~= -1): pull it and it expands on BOTH axes instead of necking in. That makes it go synclastic — drape it over a jar lid or dome and it caps the curve and hugs it instead of wrinkling, so it grips. Bundled at 4 grid sizes (3x3, 6x5, 8x8, 10x10), plus a 3x3 test coupon and the full parametric OpenSCAD source — change the grid, tile pitch, hinge width and thickness and re-render any size you like. Print in PETG or TPU: the necks are living hinges and PLA fatigue-cracks.
Around the home / Small Tools
AC/DC Socket Plug — EU Child-Safety Blanker
Round disc that fills the recess of a EU Schuko/CEE 7/3 wall socket and blocks both phase holes. Two big spherical finger pockets on the dome let you pry it back out one-handed; a U-slot at one edge wraps around the earth pin so the plug seats flush in grounded sockets. Two-colour print: dark body + yellow lightning-bolt inlay on the dome (AC/DC theme). Ø 38 mm × 19 mm dome.
Desk & office / Electronics / Cables
Desk-Edge Cable Clamp — Clip-On with Printable Thumbscrew
A C-clamp that grips the edge of any desk and carries a cable through a C-shaped snap-in hook. Held in place by a fully printable knurled thumbscrew (plastic-on-plastic thread, no metal hardware, no tools). Three-part print.
Bathroom / Washing & personal care
Pocket Comb (3D Printable)
A small printable pocket comb with a tapering tooth pattern (fine on one end, wider on the other) and a half-ellipse handle.
Desk & office / Organizers / Modular
MagDock — Magnetic Desk & Shop Organizer Family
A family of small organizers that embed neodymium discs in their backs, so they snap onto ANY ferrous surface — printer frame, fridge, toolbox, filing cabinet, radiator. Hook, tray, tall caddy, pliers/scissors slots, and a bare puck. The magnets are sealed inside DURING printing (mid-print pause), so no caps and no glue. Every part prints flat on its back with NO supports.
Around the home / Hooks
Radiator Hook — S-Hook for Towel Radiators (No Drilling, No Hardware)
A chunky plastic S-hook that slips over the top rail of a heated towel radiator and carries a towel, glove, bag, or keys on the bottom. No drilling, no adhesives, no metal hardware — one-piece print, flat on the bed, no supports.
Desk & office / Electronics / Cables
USB Drive Caddy — Hex-Grill Open-Front Cubby
N×M open-front cubby for low-profile USB-C 'disc' drives. Drives lay flat and slide in from the front; ~4 mm sticks out for pinch removal. Decorative hex perforation on top + sides. Ships pre-rotated — open face prints UP, back wall on the bed, zero supports.