TAGGED
Container
26 designs tagged “Container”.
Bathroom / Washing & personal care
Q-tip Cup — Fluted Cylinder with Snap-Fit Lid
Ø69 × 60 mm fluted cup that holds ~250 standard cotton swabs, with a faceted gem-top lid that snaps on with an audible click. Doric-style vertical flutes (24 concave grooves) on the cup, octagonal gem dome on the lid. Two STLs, prints flat, no supports.
Bathroom / Washing & personal care
Toothbrush Travel Case — Print-in-Place Hinged Box with Snap Latch
200 × 25 × 25 mm hinged toothbrush travel case. Single print-in-place — body, lid, hinge, and front snap latch all come off the bed as one assembled piece. Fold the lid 90° forward; thumb tab clicks into the catch.
Boxes & storage / Organizers / Baskets
Honeycomb Hinged Storage Box — Large (PIP, 3 sizes)
Big rectangular storage box with hex pattern on every wall + print-in-place piano hinge — prints OPEN, snaps shut, no assembly. Three sizes bundled.
Boxes & storage / Keepsake boxes / Nature
Capybara Lock Box — Magnetic Two-Key Drawer Box
A drawer box that only opens when you set TWO capybara figurines on its lid pads. The capybaras are the keys — each hides a magnet that lifts a hidden loose-magnet shear pin off the drawer rail. Both keys at once = a two-capybara combination lock. Multi-color engraved lid, captive drawer, self-locking. Uses hobby disc magnets you drop in during printing. Keys included.
Boxes & storage / Organizers / Drawers
Carousel Drawer Tower — Stacking Swing-Out Parts Organiser
A modular desk organiser of pie-wedge bins that swing out around a central post. Stack as many tiers as you like; a wide fillable ballast dish keeps it planted. Fully parametric OpenSCAD.
Boxes & storage / Keepsake boxes / Nature
Coffee Bean Box — Bean-Shaped Trinket Box (2 Parts, No Supports)
A little lidded trinket box shaped like a coffee bean, crease and all. Two printed parts, friction-fit lip, no supports, no hardware. 82 × 50 × 21 mm closed.
Boxes & storage / Lunch Boxes
Composition Book Lunchbox — a snack caddy shaped like a school notebook
A 150 x 105 x 52 mm lunch/snack caddy that looks like a marbled composition notebook. Print-in-place-style pin hinge (the pin prints too), no hardware, no supports, no glue. Three parts, three colours, and the colour split costs about 1.4 g of purge for the whole set.
Boxes & storage / Keepsake boxes / Geometric
Decorative Honeycomb Box (Parametric)
Open-top storage box with a hex pattern engraved on every wall — fully parametric OpenSCAD source.
Boxes & storage / Keepsake boxes / Geometric
Heart Trinket Box — Friction-Fit Lid (Two Fits)
A little heart-shaped box with a plug-in friction-fit lid. Two lid versions included — a relaxed fit and a firmer one — so you can pick how tightly it holds. Fully parametric OpenSCAD source.
Boxes & storage / Organizers / Baskets
Lattice Basket — Parametric Desk Organiser
A 15 × 10 × 5 cm open-lattice basket with 45° crosshatch walls, solid corner columns, and a flat rim. No supports needed.
Boxes & storage / Organizers / Baskets
Parametric Stackable Storage Box (1×1 to 5×5)
Stackable storage drawers with stud-and-hole interlock — they tile sideways and stack vertically with each other. 25 ready-to-print sizes from 1×1 up to 5×5, with both door orientations for every rectangle, plus 2 height/fit specials. Parametric SCAD source included — change pitch, height, or footprint to derive any size you want (the SCAD goes well past 5×5).
Boxes & storage / Keepsake boxes / Fantasy
Potion of Holding — Twist-Lock Flask Organizer (2 sizes)
A fantasy potion flask that twist-locks apart into a wide-mouth bin with a 4-way divider — four sorted compartments for screws, bolts, beads, pills, or tiny treasure. A friction cork plugs the neck. Two sizes from the same design: a full-size desk organizer and a mini that fits inside a 2.7-inch gacha capsule.
Boxes & storage / Keepsake boxes / Nature
Pumpkin Box — Realistic Two-Colour Lidded Pumpkin, Holds a Ø80 × 70 mm Jar
Ten-lobe pumpkin box, 131 mm wide, sculpted lobes and a gnarled green stem. Lid lifts off at the shoulder; the body swallows an 80 mm jar or candle. Two colours in one lid file, no supports. The lobes are uneven, so the lid matches the body in one rotation only.
Boxes & storage / Keepsake boxes / Geometric
Rhombic Dodecahedron Box — one part printed twice, magnets sealed inside
A 64 mm rhombic dodecahedron that opens at its equator. ONE STL, printed twice — the halves are congruent, not mirrored. Eight Ø4×2 magnets are enclosed mid-print: no glue, nothing visible, nothing to fall out. Stacks like cannonballs.
Boxes & storage / Keepsake boxes / Nature
Rose Drawer Box — Ornate Flower Trinket Cabinet (2-Colour)
A little single-drawer cabinet with a sculpted 3D rose as the drawer pull and engraved flower-vine art on every face. Prints in one colour or as a crisp 2-colour AMS set.
Boxes & storage / Keepsake boxes / Nature
Rut Box — a keepsake box locked shut by two stags' antlers
A 108 x 62 x 84 mm hunting keepsake box with a 64 ml cavity. Four antler racks — two on the base, two on the lid — interleave when the box is closed, like two stags with their horns locked in the rut. A quarter turn sweeps the racks apart and releases a bayonet lock. No hardware, no supports, no glue.
Boxes & storage / Organizers / Baskets
Stackable Lattice Basket — 4 Sizes + Parametric SCAD
Cross-stackable lattice baskets with cone-peg corner posts — any basket stacks onto any other basket. Four ready-to-print sizes from 5×5×5 cm cube up to a 20×12×8 cm tray, plus an optional cone-foot leg accessory. One open short side per basket so you can reach contents while the stack stays put. Parametric SCAD included — override basket_l/basket_w/body_h to derive any size; corner-post + peg geometry is shared so derived sizes still cross-stack with the printed ones.
Boxes & storage / Keepsake boxes / Geometric
Star Box with Pull-Handle Lid (Parametric)
A 5-point star trinket box with a friction-fit lid — choose a plain flush lid or a lid with a grab-and-hang loop handle. Fully parametric OpenSCAD source.
Boxes & storage / Keepsake boxes / Fantasy
Sugar Skull Box — Calavera Trinket Box (2 Parts, No Supports)
A Day-of-the-Dead calavera trinket box that splits at the brow — the cranium lifts off as a lid. Two printed parts, slip-fit lip, no supports, no hardware. 62 × 58 × 74 mm closed, ~37 cm³ inside. Optional AMS two-colour inlay.
Boxes & storage / Keepsake boxes / Fantasy
Trojan Horse Box — rolling, openable treasure horse
A wooden Trojan-horse keepsake box on real rolling wheels, with a hinged belly compartment — open it to reveal what you smuggled inside. NOTE: the hidden compartment is TINY (31 × 15 × 13 mm) — ring / note / tooth sized, not a storage box.
Boxes & storage / Organizers / Baskets
Truchet Bucket Box — 5-Compartment Organizer with Maze-Pattern Walls
A lidless 5-bucket organizer with a flowing Truchet-tile maze pattern engraved on all four walls. Great for beads, hardware, ball bearings, craft bits. No supports, prints flat. Fully parametric OpenSCAD source included — change bucket count, size, or pattern.
Boxes & storage / Keepsake boxes / Geometric
Bayonet Tube — Ø50 × 60 mm with Quarter-Turn Locking Caps
Cylindrical tube container with two IDENTICAL bayonet caps. Drop a cap on either end, push, twist 35°, locked. No hardware, no supports. Parametric OpenSCAD source included.
Boxes & storage / Keepsake boxes / Nature
Parasaurolophus Skull Capsule — clamshell trinket / pill box
A detailed Parasaurolophus dinosaur skull that splits at the mouth and swings open on a hidden snap-together hinge, revealing a small interior pocket — a keepsake capsule for a pill, a tiny charm, a ring, or a rolled note. Two printed parts, no glue, no hardware. Printed in PETG.
Boxes & storage / Keepsake boxes / Nature
Toadstool 🍄 — twist-open bonbon capsule
A tiny Amanita-muscaria toadstool that twists open to hide a wrapped bonbon or candy inside. The red spotted cap is a screw-off roof; underneath is a clean toadstool stalk — Amanita skirt ring and a soft volva bulb at the base — with a hollow chamber. Two-colour AMS cap. Closed capsule is Ø46 × 52 mm (min sphere Ø58 mm) — fits inside a 2.7-inch (68.6 mm) capsule. No supports, parametric OpenSCAD source included.
Desk & office / Organizers / Pen Holders
Sunflower Pen Cup — Petal Crown + Gothic Quatrefoil Body
Tall pen / marker cup with an 18-petal sunflower crown at the rim and a brick-grid of gothic quatrefoils (cathedral-rose pattern) engraved into the body wall. Single open chamber, prints upright without supports.
Desk & office / Organizers / Pen Holders
TARDIS Pen Cup — Police Box Storage Container
Doctor Who TARDIS / classic English police telephone box. Two-color pen holder with removable roof cap.