TAGGED
Jewelry
48 designs tagged “Jewelry”.
Boxes & storage / Keepsake boxes / Nature
Coffee Bean Box — Bean-Shaped Trinket Box (2 Parts, No Supports)
A little lidded trinket box shaped like a coffee bean, crease and all. Two printed parts, friction-fit lip, no supports, no hardware. 82 × 50 × 21 mm closed.
Boxes & storage / Keepsake boxes / Geometric
Heart Trinket Box — Friction-Fit Lid (Two Fits)
A little heart-shaped box with a plug-in friction-fit lid. Two lid versions included — a relaxed fit and a firmer one — so you can pick how tightly it holds. Fully parametric OpenSCAD source.
Boxes & storage / Keepsake boxes / Nature
Rose Drawer Box — Ornate Flower Trinket Cabinet (2-Colour)
A little single-drawer cabinet with a sculpted 3D rose as the drawer pull and engraved flower-vine art on every face. Prints in one colour or as a crisp 2-colour AMS set.
Boxes & storage / Keepsake boxes / Fantasy
Sugar Skull Box — Calavera Trinket Box (2 Parts, No Supports)
A Day-of-the-Dead calavera trinket box that splits at the brow — the cranium lifts off as a lid. Two printed parts, slip-fit lip, no supports, no hardware. 62 × 58 × 74 mm closed, ~37 cm³ inside. Optional AMS two-colour inlay.
Jewelry & accessories / Pendants
Amber Mosquito Pendant — Mosquito Suspended Inside a Translucent Lump, 2-Colour, No Supports
A mosquito embedded inside a lump of translucent 'amber'. Two filaments, no cavity and no glue — the insect is a second solid that the slicer prints inside the first. 33 x 30 x 7.5 mm, Ø3.5 bail, prints flat with no supports. Honest warning: the inclusion reads softly, and best when the pendant is held against the light.
Jewelry & accessories / Earrings
Antler Drop Earrings — Red Deer Rack
A red-deer rack shrunk to a 26 mm drop earring. Mirrored left and right pieces, flat on the bed face-up, no supports, 0.44 g each. Ø2.5 mm bore already sized for a 4 mm jump ring.
Jewelry & accessories / Earrings
Mini Anvil Earring — 3D Blacksmith Anvil Charm
A tiny London-pattern anvil earring, modelled fully in the round — tapered horn, overhanging working face, waisted body and spread base — with a pierced heel eye for a jump ring. Prints supportless on its side. Parametric OpenSCAD source included.
Jewelry & accessories / Earrings
Articulated Worm Dangle Earring — Print-in-Place Flexi Worm
A tiny ~38 mm print-in-place worm that actually wiggles and sways when worn. Five segments linked by captive teardrop ball-socket joints — printed flat, belly-down, NO supports, then flexed free. Friendly face with eyes + an engraved smile, and a flat ear loop in the bed plane so it hangs in classic worm side profile. Print twice for a pair.
Jewelry & accessories / Earrings
Baroque Pearl Hoop Earring — Print-in-Place Sliding Pearls
A hoop earring strung with six irregular baroque pearls that really slide around it — printed in one piece, no assembly, no supports, no jump rings between the parts.
Jewelry & accessories / Earrings
Mr Rodent — Top-Hat Earring Charm
Tiny top-hat rodent pendant for earrings/necklaces — 22 mm tall, jump-ring hole ready, two-color AMS print (body + gold hat).
Jewelry & accessories / Earrings
Dachshund Earring — 3D Wiener Dog Charm
A genuinely 3D little sausage dog charm — a plump barrel body, long snout, two floppy ears, four stubby legs and a jaunty up-curl tail, rounded on every side so it reads like a dog from any angle (not a flat relief). Prints belly-down, flat on the bed, NO supports. A jump-ring bail on the back ridge hangs it level. Single dog + a matched left/right pair STL in the download.
Jewelry & accessories / Earrings
Dendrite Lace Earrings — Every Seed Grows a Different One
A generative lace-disc earring. The web is grown by a seeded random algorithm, so changing one number in the source gives you an earring nobody else has. Two structures included (crazed-glaze and coral), both 27 mm, both print flat with no supports in about 20 minutes. Print the same file twice for a matched pair.
Jewelry & accessories / Jewelry displays
Sleeping Dragon Ring Holder — crystal spire, 3 colours, no supports
A small dragon asleep in a coil around a crystal spire on a rock. Rings slide over the crystal and rest on the dragon's back. Three separate prints in three colours that drop together with no glue and no hardware, or one print-in-place 3-colour file for an AMS. 53 x 53 x 64 mm, about 46 g, no supports.
Jewelry & accessories / Earrings
Dino Femur Bone Earring Charm — Mirrored Pair
A tiny dinosaur femur bone charm with a built-in jump-ring loop on the upper knuckle. Ships as a mirrored pair for earrings. About 20 mm tall, prints standing with no supports. Companion to the T-rex skull charm.
Jewelry & accessories / Earrings
Fiddlehead Fern Earring — Unfurling Frond Charm
A tightly coiled fiddlehead (young fern frond / crozier) as a sculpted earring charm: fine spiral ridges on the coil, delicate frond pinnae bristling along a fluted stem, and an integrated loop at the top for a jump ring. Printed and worn. Prints flat, one piece.
Jewelry & accessories / Earrings
Retro Daisy Flower Earrings — 3-Color Charm
Parametric multi-color daisy earring charm — a 6-petal flower with a half-step inner petal ring and a domed center button, all welded in one flat ~25 mm print. Hanging hole bored through the top petal. Prints flat, support-free. Ships a pre-colored 3MF (drag in, already split + colored) plus a combined STL for Split-to-Parts. Print twice for a pair.
Jewelry & accessories / Earrings
Fly Agaric Mushroom Earring — 2-Color Charm
Parametric Amanita muscaria (fly agaric) earring charm — a red domed cap with scattered white warts on a white volva stem with a drooping veil ring. Two-color for AMS: the white spots are cut as complementary dimples in the red cap, so the colors tile perfectly with no overlap and no holes through the body. Prints standing, cap up, support-free. Ships a combined STL with 2 named solids for Split-to-Parts. Print twice for a pair.
Jewelry & accessories / Earrings
Giraffe Earring — 2-Color AMS, Print-in-One, Both Facings
Full-body giraffe drop earring, 44 mm, sculpted with a flat back and a ring lug above the ossicones. Two coordinate-locked color solids in one STL: split to parts, assign cream and brown, print flat with no supports. Ships left-facing and right-facing so a pair can look the same way or at each other.
Jewelry & accessories / Earrings
Bearrings
Grizzly bear earring charms — a standing grizzly about 28 mm tall with a jump-ring bail baked into the crown so it hangs facing forward. Print a pair for earrings or one for a pendant.
Jewelry & accessories / Brooches
Half-Amphora Brooch — a real amphora, full of flowers, cut in half
A magnetic brooch, 44 x 58 mm. Not an illusion and not a flat silhouette: a proper amphora is turned as a body of revolution, given two handles and a spray of flowers, and then cut in half on the plane of the brooch's back. What is left is 6 mm of true 3D relief with a flat back. The halving is also the print trick — a solid of revolution cut on its axis plane has zero overhang anywhere, so it prints face up with no supports. Two printed pieces, four colours, sealed magnets, no pin.
Jewelry & accessories / Brooches
Hollow-Face Vase Brooch — the vase is a hole, and it follows you
A magnetic brooch, 47 x 55 mm. The vase is not raised — it is the exact mould of a vase, sunk 5.2 mm into the plaque. Your eye refuses to read it as hollow, so it bulges out instead, and appears to turn and follow whoever walks past. Nothing moves; the viewer does. Two printed pieces, four colours in one 0.6 mm band, sealed magnets, no pin.
Jewelry & accessories / Earrings
Kakapo Earring Charm — Chubby NZ Parrot Pendant
Chubby kakapo (ground parrot from NZ) charm with hanging loop — earring, necklace, or keychain-mini. Heads-up: the jump-ring loop is thin and can snap under rough handling.
Jewelry & accessories / Earrings
Viking Longship Charm — Earring & Pendant
Chunky stylized drakkar charm with dragon-head prow, shield row and stern spiral. 32 mm earring size plus a 45 mm pendant scale and a ready-to-print pair plate. Jump-ring bore already drilled through the mane.
Jewelry & accessories / Earrings
Luna Moth Earring — Flat Silhouette Charm
Parametric Luna moth (Actias luna) silhouette earring: broad swept forewings, the signature long curling swallowtail hindwing tails, four eyespot through-holes, tapered antennae, and a bail loop for a jump ring. Prints FLAT in one piece — zero overhangs, no supports. Symmetric, so print twice for a pair.
Jewelry & accessories / Earrings
Melting Candle Earring — 2-Color Charm
Parametric dripping wax candle earring charm — a tapered candle body with a melted pool rim, six irregular wax drips ending in bulbous drops, a teardrop flame and an integral hanging loop. Two-color for AMS: ivory wax body + orange flame as two named solids for Split-to-Parts. Prints STANDING, flame up, support-free (wide base on the bed, everything narrows upward). Print twice for a pair.
Jewelry & accessories / Earrings
Möbius Hoop Earrings — Twisted Ribbon, Prints Flat, No Supports
A hoop that is a real Möbius band: a 6 mm ribbon swept round a 30 mm circle, three half-twists. No supports.
Jewelry & accessories / Earrings
Morse Code Earring — Any Word, Reads Down
Parametric Morse-code earring: each letter becomes one horizontal row of dots and dashes, stacked top-to-bottom on a central strand so the word reads straight down the charm. Any A-Z / 0-9 word swaps in via one variable. Prints FLAT, face up, support-free — every feature is a round dot or stadium dash. 12 ready-made words included (LOVE, SOS, DREAM, STAR, ...). Symmetric, so print twice for a pair.
Jewelry & accessories / Earrings
Nudibranch Earring — 4-Color AMS Sea Slug, Print-in-One
Blue-and-orange aeolid sea slug charm, 36 mm, hanging head-up from a ring on its head. Four coordinate-locked colour solids in one STL: split to parts, assign white, blue, orange, brown, print flat with no supports.
Jewelry & accessories / Earrings
Panda Earring Charm — 2-Color AMS, Print-in-One
Seated giant-panda charm, 29.7 mm tall, sculpted with a flat back. Two coordinate-locked color solids in one STL: split to parts, assign white and black, print flat with no supports.
Jewelry & accessories / Earrings
Phoenix Earring Charm — perched firebird (mirrored pair)
A majestic perched phoenix charm for earrings or pendants, about 32 mm tall, with a jump-ring bail baked into the nape so it hangs upright. Ships as a mirrored left/right pair so both birds face outward. Styled after a Fawkes-like firebird — a swept-back crest, swan-curved neck, folded wings and a long fanned tail that becomes the dangle.
Jewelry & accessories / Earrings
Pomeranian Dog Earring Charm
A chibi sitting Pomeranian charm for earrings or necklaces. About 24 mm tall with a jump-ring bail baked in behind the ears so it hangs facing forward. Prints standing — supports recommended.
Jewelry & accessories / Earrings
Raven Skull Earring — flat silhouette dangle, mirrored pair, no supports
A raven (Corvus corax) skull in lateral profile as a flat dangle earring: a big domed braincase pierced by an Ø8 orbit, the heavy decurved corvid culmen with an open nare, and a mandible fused only at the articulation so an open jaw slot runs the length of the beak — that slot is what makes it read as a skull rather than a bird head. One flat piece, ~25 x 41 x 1.8 mm, 0.93 g, printed face-up with zero overhangs and no supports. Ships mirrored left and right STLs so a worn pair both faces outward, and a fully parametric OpenSCAD source: size, thickness, hang angle, orbit and nare, bail hole.
Jewelry & accessories / Earrings
Remembrall Memory Orb Earring — 3-Color Smoke-Gem Charm
A faceted smoke-gem memory orb as a 3-color earring charm: a translucent red glass orb wrapped by a gold equatorial band of porthole dots, with a gold hanging bail on top. Prints in one piece on an AMS / multi-material printer — drop in the combined STL and Split-to-Parts, or print the per-color STLs separately. ~14 mm orb, support-free, print twice for a pair.
Jewelry & accessories / Earrings
Chibi Seal Earring Charms — Mirrored Pair
Chubby baby-seal charm pair with built-in hanging loops — 20 mm body, mirrored left/right, prints flat on the belly with no supports. Add jump rings + ear hooks for earrings, or hang one on a chain as a pendant.
Jewelry & accessories / Earrings
Great White Shark Earring Charm — Bites the Ring
A realistic sleek great-white shark charm that bites a jump-ring held in its mouth. The ring is the hang point, so it wears nose-up / tail-down. About 37 x 66 x 25 mm. NOTE: the thin fins are very brittle — handle gently and print with supports.
Jewelry & accessories / Earrings
Spider Drop Earring — the spider actually SWINGS on its dragline
An orb web with a spider hanging below it on a dragline that is a real pivot, not a printed line. The dragline's top end is an eye captured on a post at the web hub and closed by a cap, so the spider is a free pendulum that swings side to side as you move. Print-in-place: one flat plate, two bodies, no supports, nothing to assemble. 20.0 x 40.1 x 4.9 mm, ~0.6 g. Print two for a pair.
Jewelry & accessories / Earrings
Strix Owl Earring Charm
A finely detailed horned-owl charm for earrings or pendants, about 25 mm tall with a jump-ring bail baked into the crown. Note: the photographed pair was printed in wood-fill PLA, which is NOT recommended for a piece this small and detailed — plain or silk PLA gives far cleaner results.
Jewelry & accessories / Earrings
Sushi Maki Roll Earring (3-color maki sushi charm)
Tiny parametric maki-roll sushi earring — hand-rolled irregular outline, individual rice grains on the cut face, nori overlap seam. 3-color AMS, print-in-one, support-free.
Jewelry & accessories / Earrings
Sushi Nigiri Earring (3-color salmon nigiri charm)
Tiny parametric salmon-nigiri sushi earring — textured rice grains, marbled salmon, dark nori strap. 3-color AMS, print-in-one, support-free.
Jewelry & accessories / Earrings
Tiny Book Earring — a wearable book that really opens, print-in-place hinge, no supports
A book small enough to wear that actually opens. One print-in-place piece: two covers on a seven-knuckle piano hinge with a captive pin, a hollow page cavity inside, and ONCE UPON engraved on the inner cover so the message only shows when you open it. 22 x 17.6 x 4.2 mm closed, 1.55 g, about 25 minutes, no supports and no hardware beyond an ear wire. Comes off the plate open flat; fold it once and it clicks shut on a printed detent bead, and a thumbnail in the fore-edge scallop pops it open again. Fully parametric OpenSCAD source — size, cover thickness, hinge clearance, detent grip and the engraved message are all variables.
Jewelry & accessories / Earrings
T-Rex Skull Earring Charm — Mirrored Pair
A detailed T-rex skull charm with a built-in jump-ring loop on the cranium. Ships as a mirrored pair for earrings. About 32 mm long, prints standing with tree supports for the jaw. Companion to the dino femur bone charm.
Jewelry & accessories / Earrings
Trojan Horse Earring — Wooden Horse of Troy
The wooden horse of Troy as a wearable charm — a wheeled-plank Trojan Horse pendant. Two flavours in one download: a flat engraved silhouette that prints supportless, and an in-the-round 3D horse on a roller cart.
Jewelry & accessories / Earrings
Viola Earring — 4-Color AMS Pansy Blossom, Print-in-One
Viola (pansy) blossom charm, 28 mm, hanging from a ring above the upper petals. Four coordinate-locked colour solids in one STL: split to parts, assign magenta, violet, yellow, dark, print flat with no supports.
Jewelry & accessories / Earrings
Ship's-Wheel Earring — Free-Spinning, Print-in-Place
A miniature ship's-wheel (helm) charm whose wheel actually spins on its bail. Printed as ONE support-free job: the wheel comes off the bed already captive on a fixed axle between a foot and a top cap. Flat print, vertical axle, so every wheel-to-frame clearance is a clean horizontal gap — no supports, no teardrop bore. Symmetric — print twice for a pair.
Jewelry & accessories / Earrings
Gothic Pigtail Girl Silhouette Earring — Flat Charm
A flat full-body silhouette of a somber girl in braided pigtails and a dark dress, sized as a dangle earring charm with an integral bail loop at the crown. Prints FLAT on its back, face up — zero overhangs, no supports. About 42 mm tall. Print twice for a pair.
Jewelry & accessories / Earrings
Winged Sandal Earrings — Hermes' talaria, flat two-colour pair
The winged sandal of Hermes (talaria, the 'Mercury foot') as a flat two-colour dangle earring — sole, up-curled toe and an ankle strap that arcs up and becomes the bail, with a feathered heel wing in a second colour. Both colours tile ONE flat plate at the same height, so they print flush in the same layers with no step, no overlap and no supports. ~35 mm tall, 2.2 mm thick, about 2 g for the pair. Mirrored L+R so the toes point outward when worn.
Jewelry & accessories / Earrings
Zebra Earring — 2-Color AMS, Print-in-One, Both Facings
Full-body zebra drop earring, 32 mm, sculpted with a flat back and a ring lug on the crest. Two coordinate-locked color solids in one STL: split to parts, assign white and black, print flat with no supports. Ships left-facing and right-facing so a pair can look the same way or at each other.
Footwear
Lace Dubrae — Custom Sneaker Lace Name Plates (parametric, 48 names + your own)
Sneaker lace dubraes — the little name plate that rides on your shoelaces. The lace runs hidden through one big channel that exits both ends, so the top stays a clean, curved name plate (it bows lengthwise like the real metal ones). One shared BODY hosts every name: print the body once, then drop any text plate on top in a contrast filament. Ships the body plus 48 ready-made names AND the full parametric .scad so you can type any word and re-render. Prints dead flat, no supports.