TAGGED
Print-in-place
32 designs tagged “Print-in-place”.
Bathroom / Washing & personal care
Toothbrush Travel Case — Print-in-Place Hinged Box with Snap Latch
200 × 25 × 25 mm hinged toothbrush travel case. Single print-in-place — body, lid, hinge, and front snap latch all come off the bed as one assembled piece. Fold the lid 90° forward; thumb tab clicks into the catch.
Board games / Find your game / Dungeons & Dragons
Adventurer Dial Base — a mini base that counts your damage 0–9
A Ø36 mm miniature base with a rotating 0–9 counter ring built into it. It prints in place: the disc and the ring come off the plate already interlocked, no assembly, no hardware. A hooded wanderer figure is included — drop it in, or print the version with it welded on.
Board games / Find your game / Frosthaven
Ghost Falcon Summon Standee with Life Dial — Frosthaven
A 37.5 mm hex standee for Cassandra's Ghost Falcon summon. The captive ring turns to show 1–4 life; the pedestal shows 2 damage, 4 health and 3 movement. One print, no assembly.
Board games / Find your game / Frosthaven
Frosthaven Lurker Deepwraith Kill Counter
Snap-together rotating dial that tracks kills through a window under a skull. Sized for the Lurker (Deepwraith) Frosthaven personal quest. Also ships a 0-9 variant for any game that wants a tiny mechanical counter.
Board games / Accessories / Timers
Ticking Turn Timer — wind-up escapement, no electronics, no metal parts
A real mechanical escapement you can print: wind the knob, let go, and a foliot bar rocks tick-tick-tick while an arrow creeps back over the dial — silence means the turn is over. All 7 parts print flat and supportless; the only non-printed items are two coins used as tuning weights. NOTE: this is a mechanism demonstrator / desk toy, NOT an accurate timer — see the description.
Board games / Find your game / Dungeons & Dragons
Spell-Slot Abacus — print-in-place D&D spell-slot tracker
A print-in-place abacus for tracking D&D spell slots: 9 rails (spell levels 1–9) of captive sliding crystal beads (4/3/3/3/3/2/2/1/1 = full-caster max). Slide a bead to burn a slot, sweep back on a long rest. A tilt-lock detent at mid-span keeps the count from scrambling when you pick the board up. ~107 × 130 × 8 mm, zero supports.
Board games / Find your game / Magic: The Gathering / Counters
MTG — Amass Army Dial (0–15, goblin knob)
A two-part rotating counter for a single growing Army token. Only ONE number is ever visible, through a window in the fixed cap, so it reads like a tally slate rather than a clock face. Thumb on the goblin holds the cap, fingers turn the scalloped rim, every number lands with a detent click. Two printed parts, no glue, no hardware, no supports.
Board games / Find your game / Magic: The Gathering / Counters
MTG Treasure Token Chest — print-in-place pirate chest counter (1-6)
A working pirate chest that IS your MTG Treasure counter: friction-fit gold coins stand edge-up in six slots and the number standing is the count (1-6). Real print-in-place barrel lid on a piano hinge — closes with all six coins seated. Coins print separately in gold. Includes a brand-neutral GEM coin too, so the same chest doubles as a loot/gold tracker for D&D and any dungeon-crawler.
Boxes & storage / Organizers / Baskets
Honeycomb Hinged Storage Box — Large (PIP, 3 sizes)
Big rectangular storage box with hex pattern on every wall + print-in-place piano hinge — prints OPEN, snaps shut, no assembly. Three sizes bundled.
Boxes & storage / Keepsake boxes / Fantasy
Pirate treasure chest — print-in-place hinged trinket box, two colour
A 100 mm barrel-top pirate chest that comes off the bed as one working unit. The piano hinge prints in place, so there is no assembly, no pin to fit and no glue. Two-colour for the AMS: wood planks plus iron straps, banding, corner brackets, lock plate and hasp.
Jewelry & accessories / Earrings
Articulated Worm Dangle Earring — Print-in-Place Flexi Worm
A tiny ~38 mm print-in-place worm that actually wiggles and sways when worn. Five segments linked by captive teardrop ball-socket joints — printed flat, belly-down, NO supports, then flexed free. Friendly face with eyes + an engraved smile, and a flat ear loop in the bed plane so it hangs in classic worm side profile. Print twice for a pair.
Jewelry & accessories / Earrings
Baroque Pearl Hoop Earring — Print-in-Place Sliding Pearls
A hoop earring strung with six irregular baroque pearls that really slide around it — printed in one piece, no assembly, no supports, no jump rings between the parts.
Around the home / Hooks
Bat Ceiling Hook — hangs by its own feet, head down, like a real bat
A roosting bat that hooks over a ceiling hook by its two toe-rings and gives you two open claw hooks at the bottom for cords, string lights or a planter. One part, no supports, no assembly.
Toys & mechanisms / Whistles
Beawhistle — beaver whistle, loud twin-chamber, one piece, no supports
A beaver standing on its tail with a chewed stick in its teeth that is also a loud pealess whistle: blow into the stick, the sound leaves two slots between its shoulder blades. Two stopped-pipe chambers of unequal length pulse against each other — measured on the printed part at 2205 Hz with a ~70 Hz warble, the Fox-40 architecture. 99 x 26 x 50 mm, one piece, print-in-place, no supports, no hardware.
Decorations / Coasters
Chainmail Coaster — 8 cm flexible print-in-place grid
80×80 mm drink coaster built from 11×11 print-in-place cube hubs, each linked to its neighbours by tilted ring pairs. Prints in one go, comes off the bed as a flexible chainmail fabric that drapes under a glass.
Toys & mechanisms / Fidgets
Flexi Snake — print-in-place articulated fidget that coils
A print-in-place snake that prints in one piece, no supports, and coils into a full spiral in your hand. 16 necked vertebrae on captive ball-and-stalk joints, each folding 50-70 degrees, plus a carved head with eyes and scale rings. Fully parametric: dial the number of segments and their length right in the .scad.
Toys & mechanisms / Fidgets
Infinity Cube — Animal Fidget (folding magic cube, 48 engraved animals, two-colour)
A folding infinity cube (magic cube) fidget toy: eight cubelets linked so you can fold it end over end forever. Every one of the 48 faces carries a different animal silhouette. Prints fully assembled — the links are captured by the cube geometry, not glued — and the animals come as a separate inlay STL so you can print them in a contrast colour. Confirmed printed and everting on a real machine.
Toys & mechanisms / Mechanical
Marble Run — Print-in-Place Roman-Greek Track
One-shot print-in-place marble run with a 3-pin plinko mid-section, sloped chute finish, and integrated Roman column supports. Greek-key meander engravings on all outer walls. Ships with a standalone start-hopper accessory + start/finish flag pair.
Toys & mechanisms / Whistles
Narwhistle — narwhal whistle, loud twin-chamber, one piece, no supports
A narwhal standing on its flukes on an ice floe that is also a loud pealess whistle: blow into the tusk, the sound leaves the blowhole. Two stopped-pipe chambers of unequal length pulse against each other — measured on the printed part at 2266 Hz with a ~66 Hz warble, the Fox-40 architecture. 102 x 40 x 31 mm, one piece, print-in-place, no supports, no hardware.
Boxes & storage / Keepsake boxes / Nature
Parasaurolophus Skull Capsule — clamshell trinket / pill box
A detailed Parasaurolophus dinosaur skull that splits at the mouth and swings open on a hidden snap-together hinge, revealing a small interior pocket — a keepsake capsule for a pill, a tiny charm, a ring, or a rolled note. Two printed parts, no glue, no hardware. Printed in PETG.
Decorations / Seasonal
Snowflake Set — Ornament · Coaster · Fridge Magnet · Earrings · Print-in-Place Cuff (Parametric)
A family of 6-fold dendrite snowflakes from one parametric generator: a tree ornament, an openwork drink coaster, a sealed-in fridge magnet, dainty earrings, a single cord charm, and a print-in-place hinged bracelet cuff that folds off the bed already articulated and locks with a toggle clasp. All print FLAT, face-down, NO supports.
Jewelry & accessories / Earrings
Spider Drop Earring — the spider actually SWINGS on its dragline
An orb web with a spider hanging below it on a dragline that is a real pivot, not a printed line. The dragline's top end is an eye captured on a post at the web hub and closed by a cap, so the spider is a free pendulum that swings side to side as you move. Print-in-place: one flat plate, two bodies, no supports, nothing to assemble. 20.0 x 40.1 x 4.9 mm, ~0.6 g. Print two for a pair.
Toys & mechanisms / Mechanical
Tank Shooter — chunky display tank, print-in-place tracks
A chunky stylised T-34-ish display tank: articulated print-in-place link tracks that wrap the road wheels, a rotating turret, and a cosmetic gun with a friction-seated dummy shell. No glue, no supports, no hardware, AMS multi-colour. A DISPLAY model — the tracks don't drive and the gun doesn't fire.
Jewelry & accessories / Earrings
Tiny Book Earring — a wearable book that really opens, print-in-place hinge, no supports
A book small enough to wear that actually opens. One print-in-place piece: two covers on a seven-knuckle piano hinge with a captive pin, a hollow page cavity inside, and ONCE UPON engraved on the inner cover so the message only shows when you open it. 22 x 17.6 x 4.2 mm closed, 1.55 g, about 25 minutes, no supports and no hardware beyond an ear wire. Comes off the plate open flat; fold it once and it clicks shut on a printed detent bead, and a thumbnail in the fore-edge scallop pops it open again. Fully parametric OpenSCAD source — size, cover thickness, hinge clearance, detent grip and the engraved message are all variables.
Toys & mechanisms / Fidgets
Trammel of Archimedes — Do-Nothing Machine Fidget
A classic 'do-nothing machine': a gloriously useless desk fidget. Crank the knob and the arm traces a perfect ellipse over an engraved groove — and that's it, it does nothing else, forever. Two dovetail sliders shuttle in perpendicular channels; a knobbed crank arm snaps onto both. 3 unique parts (print the slider twice), all flat, no supports. Honest heads-up: the motion is not glass-smooth — at the crossroad a slider can catch and need a tiny nudge.
Jewelry & accessories / Earrings
Ship's-Wheel Earring — Free-Spinning, Print-in-Place
A miniature ship's-wheel (helm) charm whose wheel actually spins on its bail. Printed as ONE support-free job: the wheel comes off the bed already captive on a fixed axle between a foot and a top cap. Flat print, vertical axle, so every wheel-to-frame clearance is a clean horizontal gap — no supports, no teardrop bore. Symmetric — print twice for a pair.
Decorations / Magnets
Weather Dial Fridge Magnet — spin it to today's weather
A fridge magnet with a live front. Thumb the knurled rim through the side notch and the dial clicks into four detented positions — sun, rain, cloud, snow — showing one icon at a time through the porthole. The three magnets are sealed inside solid plastic on both faces: no glue, no exposed metal against the door, nothing to fall out. They go in during the print, at a single pause. The dial ships as five files sharing one coordinate frame, so it prints in five colours with nothing to group by hand. Prints supportless. Parametric OpenSCAD source included.
Kitchen / Drink Holders
Cup Holder with Print-in-Place Chain Handle
A portable cup / can holder that hangs from a handbag-style chain handle — printed in place, no chain assembly. Skeleton cage cup fits cans and cups up to ~75 mm. Split jump-ring end links clip the chain to the cup horns. Drape it over a door handle, stroller bar, chair arm, or hook.
Around the home / Hooks
Radiator Hook — S-Hook for Towel Radiators (No Drilling, No Hardware)
A chunky plastic S-hook that slips over the top rail of a heated towel radiator and carries a towel, glove, bag, or keys on the bottom. No drilling, no adhesives, no metal hardware — one-piece print, flat on the bed, no supports.
Around the home / Small Tools
Print-in-Place Spring-Gate Carabiner — keychain clip (PETG)
A one-piece print-in-place keychain carabiner. No pin, no separate gate, no spring, no assembly — the body itself is the spring. Push the thin flank inward with your thumb, the gate opens, hook it on, release, it snaps shut. Prints flat with no supports. PETG recommended. NOTE: a light keychain clip for small items only — NOT a safety / climbing / load-bearing carabiner.
Footwear
Traveling Shoe Horns
Three compact, packable shoe horns in one set — a thin bent-sheet spoon, a print-in-place folding one, and a rotating/pivoting one. All slim enough to drop in a bag, suitcase, or coat pocket. Print them solid and strong, and treat them with a little care.
Kitchen / Tools
Utensil Rest — spoon / ladle / spatula rest with a deep drip bowl, anti-soak ribs and a raised handle saddle
A hob-side spoon rest that keeps the handle off the counter. The spoon head sits in a 8.5 mm-deep elliptical drip bowl, radial ribs hold it up out of its own drips, and a 30 mm saddle at the end cradles the handle in a U-groove. One piece, 132 x 88 x 30 mm, prints flat with no supports. Fully parametric OpenSCAD source included.