Box

Bathroom / Makeup organizers

Tenshu Makeup Organizer — Japanese castle keep, 3 lift-off storeys

A Japanese castle keep (tenshu) that sorts makeup. Every roof is the lid of the storey under it: the base holds four compacts on edge in a lift-out comb plus a polish bay, the second storey has three coved lanes for a mascara, lipsticks and pencils lying down, the third a tweezer lane and two cells for lashes, pins and rings. Every pocket is a hull of four spheres, so the floor meets the wall on a 4 mm cove and nothing is a square corner or a blind hole: lift, lift, lift, tip, rinse. Five parts, no supports, no glue, no hardware — each lid seats on a 2.4 mm ring so the stack does not rock, and magnets are an option, not a need. Ships as one-colour STLs and, for a multi-filament printer, as one three-colour STL per part that Split to Parts divides into exactly three: cream plaster, dark timber, slate stone-and-tile. A five-colour split-to-parts STL per part ships too, if you have the slots for a separate plinth grey and gold shachihoko.

Bathroom / Washing & personal care

Toothbrush Travel Case — Print-in-Place Hinged Box with Snap Latch

200 × 25 × 25 mm hinged toothbrush travel case. Single print-in-place — body, lid, hinge, and front snap latch all come off the bed as one assembled piece. Fold the lid 90° forward; thumb tab clicks into the catch.

Board games / Classic games / Dominoes

Domino Box — Sleeve + Tray for the Double-Six 28-Tile Set (OpenSCAD)

Two-piece storage for a full 28-tile double-six domino set. Outer sleeve (closed on 5 faces, open on one short end) + inner tray with a Ø28 mm semicircular thumb-notch on its front wall. Tiles lie flat in a 4×2 grid of 4-tile stacks (32-slot capacity). Sleeve prints with the open mouth UP — fully supportless. Engraved decorative pip pattern on every long face. Parametric SCAD lets you re-tune tile dimensions, slop, layout (piles_x × piles_y), pip pattern, or wall thicknesses.

Board games / Original games

Harbour Light — pocket board game in a box that is the board

Boxes & storage / Keepsake boxes / Fantasy

Library of Alexandria box — a magnetic box under the great dome

The Library of Alexandria as a box: a white-marble hall behind an arcade of pointed arches, a full-width stair, four turrets under gilded onion domes and a great ribbed dome on a chevroned drum. Everything above the cornice is the lid, and eight Ø5 × 3 mm magnets buried mid-print hold it shut. 118 × 96 × 113 mm outside, 90 × 60 × 45 mm inside. Six STLs, two prints, no supports, no glue.

Boxes & storage / Organizers / Baskets

Honeycomb Hinged Storage Box — Large (PIP, 3 sizes)

Big rectangular storage box with hex pattern on every wall + print-in-place piano hinge — prints OPEN, snaps shut, no assembly. Three sizes bundled.

Boxes & storage / Keepsake boxes / Fantasy

Castle keep box — a fortified keep that opens at the wall-walk

A 112 mm square castle keep whose lid is the wall-walk: lift the battlements, four corner drums and their tiled conical roofs straight off and the keep is a 70 x 70 x 64 mm box. Two prints, no supports, no hardware, nothing to glue. The lid rests rather than latches, so it is a table box, not a travelling one. Multi-colour for the AMS, and it still reads as a castle in one filament.

Boxes & storage / Keepsake boxes / Nature

Coffee Bean Box — Bean-Shaped Trinket Box (2 Parts, No Supports)

A little lidded trinket box shaped like a coffee bean, crease and all. Two printed parts, friction-fit lip, no supports, no hardware. 82 × 50 × 21 mm closed.

Boxes & storage / Keepsake boxes / Fantasy

Coffin Pencil Case — Magnetic Box with a Death's-Head Moth Lid

A toe-pincher coffin box for pens, markers and brushes. The lid is held by six pairs of hidden magnets buried mid-print, so no fastener is visible anywhere. Prints flat, no supports, one colour or two.

Boxes & storage / Lunch Boxes

Composition Book Lunchbox — a snack caddy shaped like a school notebook

A 150 x 105 x 52 mm lunch/snack caddy that looks like a marbled composition notebook. Print-in-place-style pin hinge (the pin prints too), no hardware, no supports, no glue. Three parts, three colours, and the colour split costs about 1.4 g of purge for the whole set.

Boxes & storage / Keepsake boxes / Geometric

Crumpled Paper Box — Magnetic Lid

Small crumpled-paper storage box with an enclosed magnetic lid. Two prints, eight 5 x 3 mm magnets.

Boxes & storage / Keepsake boxes / Geometric

Decorative Honeycomb Box (Parametric)

Open-top storage box with a hex pattern engraved on every wall — fully parametric OpenSCAD source.

Boxes & storage / Keepsake boxes / Fantasy

Elven Motif Keepsake Box — vesica plan, interlaced vine walls, two-colour leaf inlay

A pointed-oval trinket box where every ornament is the same shape at three scales: the box plan, the leaves woven into the wall braid, and the veined leaf inlaid in the lid. The wall vine is a genuine over-and-under interlace, not two sine waves. Two printed parts, no supports, no hardware, no glue — and the two-colour lid costs about 1 g of purge because all the ink sits in three layers.

Boxes & storage / Keepsake boxes / Fantasy

Elven seed archive — four-colour drawer box, pinned roof, no glue

Four-colour elven drawer box, 240 x 200 x 70 mm closed, with a scalloped leaf roof, arched tracery windows and a full-width pull-out drawer. Three prints plus four friction pins, no glue, no supports, no hardware.

Boxes & storage / Keepsake boxes / Fantasy

Grimoire Box — a hinged spellbook with the magnets sealed inside

A leather-bound tome that opens on a real barrel hinge. Two sizes, any word you like on the cover, and four magnets that end up fully enclosed in the plastic - nothing visible in any face. Three printed parts, no supports, no screws, no glue.

Boxes & storage / Keepsake boxes / Fantasy

Haunted Castle Magnetic Storage Box

Halloween castle storage box with a lift-off roof, hidden magnets and two printing routes: multicolour or separate parts.

Boxes & storage / Keepsake boxes / Geometric

Heart Trinket Box — Friction-Fit Lid (Two Fits)

A little heart-shaped box with a plug-in friction-fit lid. Two lid versions included — a relaxed fit and a firmer one — so you can pick how tightly it holds. Fully parametric OpenSCAD source.

Boxes & storage / Keepsake boxes / Geometric

Letohrádek Hvězda — star-shaped building box

Prague’s star-shaped palace as a storage box with a loose roof cover. Not suitable for travel packaging.

Boxes & storage / Organizers / Baskets

Parametric Stackable Storage Box (1×1 to 5×5)

Stackable storage drawers with stud-and-hole interlock — they tile sideways and stack vertically with each other. 25 ready-to-print sizes from 1×1 up to 5×5, with both door orientations for every rectangle, plus 2 height/fit specials. Parametric SCAD source included — change pitch, height, or footprint to derive any size you want (the SCAD goes well past 5×5).

Boxes & storage / Keepsake boxes / Fantasy

Mead hall box — a Viking longhouse whose whole roof lifts off

A 199 mm Viking longhouse whose whole shingled roof lifts off, leaving a 177 x 83 x 31 mm box with the hollow roof above it. Two prints in one wood-fill filament, no supports, no hardware, nothing to glue. Every plank, knot and shingle is cut and jittered from one seed, so it reads hand-built. The roof rests on a tongue, it does not latch, so it is a table box, not a travelling one.

Boxes & storage / Keepsake boxes / Nature

Pumpkin Box — Realistic Two-Colour Lidded Pumpkin, Holds a Ø80 × 70 mm Jar

Ten-lobe pumpkin box, 131 mm wide, sculpted lobes and a gnarled green stem. Lid lifts off at the shoulder; the body swallows an 80 mm jar or candle. Two colours in one lid file, no supports. The lobes are uneven, so the lid matches the body in one rotation only.

Boxes & storage / Keepsake boxes / Geometric

Rhombic Dodecahedron Box — one part printed twice, magnets sealed inside

A 64 mm rhombic dodecahedron that opens at its equator. ONE STL, printed twice — the halves are congruent, not mirrored. Eight Ø4×2 magnets are enclosed mid-print: no glue, nothing visible, nothing to fall out. Stacks like cannonballs.

Boxes & storage / Keepsake boxes / Nature

Rose Drawer Box — Ornate Flower Trinket Cabinet (2-Colour)

A little single-drawer cabinet with a sculpted 3D rose as the drawer pull and engraved flower-vine art on every face. Prints in one colour or as a crisp 2-colour AMS set.

Boxes & storage / Keepsake boxes / Fantasy

Renaissance castle box — inspired by Rosenborg, the whole castle lifts off a hidden tray

A 240 x 108 x 250 mm Dutch Renaissance castle, inspired by Rosenborg in Copenhagen but not a 1:1 replica, that is a box: the whole four-colour castle is one print and lifts off a hidden tray. Almost three days of printing with a four-slot automatic filament changer. No supports, no hardware, no glue.

Boxes & storage / Keepsake boxes / Nature

Rut Box — a keepsake box locked shut by two stags' antlers

A 108 x 62 x 84 mm hunting keepsake box with a 64 ml cavity. Four antler racks — two on the base, two on the lid — interleave when the box is closed, like two stags with their horns locked in the rut. A quarter turn sweeps the racks apart and releases a bayonet lock. No hardware, no supports, no glue.

Boxes & storage / Keepsake boxes / Geometric

Star Box with Pull-Handle Lid (Parametric)

A 5-point star trinket box with a friction-fit lid — choose a plain flush lid or a lid with a grab-and-hang loop handle. Fully parametric OpenSCAD source.

Boxes & storage / Keepsake boxes / Fantasy

Sugar Skull Box — Calavera Trinket Box (2 Parts, No Supports)

A Day-of-the-Dead calavera trinket box that splits at the brow — the cranium lifts off as a lid. Two printed parts, slip-fit lip, no supports, no hardware. 62 × 58 × 74 mm closed, ~37 cm³ inside. Optional AMS two-colour inlay.

Boxes & storage / Keepsake boxes / Fantasy

Trojan Horse Box — rolling, openable treasure horse

A wooden Trojan-horse keepsake box on real rolling wheels, with a hinged belly compartment — open it to reveal what you smuggled inside. NOTE: the hidden compartment is TINY (31 × 15 × 13 mm) — ring / note / tooth sized, not a storage box.

Boxes & storage / Organizers / Baskets

Truchet Bucket Box — 5-Compartment Organizer with Maze-Pattern Walls

A lidless 5-bucket organizer with a flowing Truchet-tile maze pattern engraved on all four walls. Great for beads, hardware, ball bearings, craft bits. No supports, prints flat. Fully parametric OpenSCAD source included — change bucket count, size, or pattern.

Boxes & storage / Keepsake boxes / Fantasy

Tudor house box — half-timbered town house whose upper storey lifts off

A 184 x 214 x 150 mm half-timbered Tudor town house that is a box: the jettied upper storey, twin-gabled tile roof and chimney lift off as one lid over a 164 x 194 x 90 mm cavity. Two prints, nine coordinate-locked colour solids, no supports, no hardware.

Desk & office / Organizers / Modular

Moku Iris Box — Working Camera-Aperture Catch-All (Base Rail module)

A round fluted catch-all box for the Moku modular desk system whose lid is a WORKING 6-blade iris diaphragm — twist the knurled collar and the blades spiral open like a camera aperture onto the cavity (Ø48 mm) for clips, SD cards and coins. Same-plane pinwheel iris: 6 identical rigid blades on pivot posts, drive pins riding radial collar slots, snap-on collar, 1-minute no-order assembly, zero supports. Clips onto the host Base Rail by the reverse-measured foot interface. A remix of the Moku Base Rail by @SabreDesign / @Collecticraft.