TAGGED
Gift
33 designs tagged “Gift”.
Boxes & storage / Keepsake boxes / Nature
Capybara Lock Box — Magnetic Two-Key Drawer Box
A drawer box that only opens when you set TWO capybara figurines on its lid pads. The capybaras are the keys — each hides a magnet that lifts a hidden loose-magnet shear pin off the drawer rail. Both keys at once = a two-capybara combination lock. Multi-color engraved lid, captive drawer, self-locking. Uses hobby disc magnets you drop in during printing. Keys included.
Boxes & storage / Keepsake boxes / Nature
Coffee Bean Box — Bean-Shaped Trinket Box (2 Parts, No Supports)
A little lidded trinket box shaped like a coffee bean, crease and all. Two printed parts, friction-fit lip, no supports, no hardware. 82 × 50 × 21 mm closed.
Boxes & storage / Keepsake boxes / Geometric
Heart Trinket Box — Friction-Fit Lid (Two Fits)
A little heart-shaped box with a plug-in friction-fit lid. Two lid versions included — a relaxed fit and a firmer one — so you can pick how tightly it holds. Fully parametric OpenSCAD source.
Boxes & storage / Keepsake boxes / Geometric
Star Box with Pull-Handle Lid (Parametric)
A 5-point star trinket box with a friction-fit lid — choose a plain flush lid or a lid with a grab-and-hang loop handle. Fully parametric OpenSCAD source.
Boxes & storage / Keepsake boxes / Fantasy
Sugar Skull Box — Calavera Trinket Box (2 Parts, No Supports)
A Day-of-the-Dead calavera trinket box that splits at the brow — the cranium lifts off as a lid. Two printed parts, slip-fit lip, no supports, no hardware. 62 × 58 × 74 mm closed, ~37 cm³ inside. Optional AMS two-colour inlay.
Jewelry & accessories / Pendants
Amber Mosquito Pendant — Mosquito Suspended Inside a Translucent Lump, 2-Colour, No Supports
A mosquito embedded inside a lump of translucent 'amber'. Two filaments, no cavity and no glue — the insect is a second solid that the slicer prints inside the first. 33 x 30 x 7.5 mm, Ø3.5 bail, prints flat with no supports. Honest warning: the inclusion reads softly, and best when the pendant is held against the light.
Jewelry & accessories / Earrings
Antler Drop Earrings — Red Deer Rack
A red-deer rack shrunk to a 26 mm drop earring. Mirrored left and right pieces, flat on the bed face-up, no supports, 0.44 g each. Ø2.5 mm bore already sized for a 4 mm jump ring.
Jewelry & accessories / Earrings
Articulated Worm Dangle Earring — Print-in-Place Flexi Worm
A tiny ~38 mm print-in-place worm that actually wiggles and sways when worn. Five segments linked by captive teardrop ball-socket joints — printed flat, belly-down, NO supports, then flexed free. Friendly face with eyes + an engraved smile, and a flat ear loop in the bed plane so it hangs in classic worm side profile. Print twice for a pair.
Desk & office / Reading & writing
Literary Hero Bookmarks — 15 Silhouettes (16×70mm)
Set of 15 literary-character bookmarks: Sherlock, Dracula, Gandalf, Smaug, Frodo, Hook, Raven, Cheshire Cat, Alice, White Rabbit, Hamlet, Robin Hood, Long John Silver, Mad Hatter, Phoenix. Slim 1.2 mm strip, silhouette topper, tassel hole.
Jewelry & accessories / Earrings
Dachshund Earring — 3D Wiener Dog Charm
A genuinely 3D little sausage dog charm — a plump barrel body, long snout, two floppy ears, four stubby legs and a jaunty up-curl tail, rounded on every side so it reads like a dog from any angle (not a flat relief). Prints belly-down, flat on the bed, NO supports. A jump-ring bail on the back ridge hangs it level. Single dog + a matched left/right pair STL in the download.
Jewelry & accessories / Earrings
Dendrite Lace Earrings — Every Seed Grows a Different One
A generative lace-disc earring. The web is grown by a seeded random algorithm, so changing one number in the source gives you an earring nobody else has. Two structures included (crazed-glaze and coral), both 27 mm, both print flat with no supports in about 20 minutes. Print the same file twice for a matched pair.
Jewelry & accessories / Jewelry displays
Sleeping Dragon Ring Holder — crystal spire, 3 colours, no supports
A small dragon asleep in a coil around a crystal spire on a rock. Rings slide over the crystal and rest on the dragon's back. Three separate prints in three colours that drop together with no glue and no hardware, or one print-in-place 3-colour file for an AMS. 53 x 53 x 64 mm, about 46 g, no supports.
Jewelry & accessories / Earrings
Fiddlehead Fern Earring — Unfurling Frond Charm
A tightly coiled fiddlehead (young fern frond / crozier) as a sculpted earring charm: fine spiral ridges on the coil, delicate frond pinnae bristling along a fluted stem, and an integrated loop at the top for a jump ring. Printed and worn. Prints flat, one piece.
Jewelry & accessories / Earrings
Retro Daisy Flower Earrings — 3-Color Charm
Parametric multi-color daisy earring charm — a 6-petal flower with a half-step inner petal ring and a domed center button, all welded in one flat ~25 mm print. Hanging hole bored through the top petal. Prints flat, support-free. Ships a pre-colored 3MF (drag in, already split + colored) plus a combined STL for Split-to-Parts. Print twice for a pair.
Jewelry & accessories / Earrings
Fly Agaric Mushroom Earring — 2-Color Charm
Parametric Amanita muscaria (fly agaric) earring charm — a red domed cap with scattered white warts on a white volva stem with a drooping veil ring. Two-color for AMS: the white spots are cut as complementary dimples in the red cap, so the colors tile perfectly with no overlap and no holes through the body. Prints standing, cap up, support-free. Ships a combined STL with 2 named solids for Split-to-Parts. Print twice for a pair.
Jewelry & accessories / Earrings
Giraffe Earring — 2-Color AMS, Print-in-One, Both Facings
Full-body giraffe drop earring, 44 mm, sculpted with a flat back and a ring lug above the ossicones. Two coordinate-locked color solids in one STL: split to parts, assign cream and brown, print flat with no supports. Ships left-facing and right-facing so a pair can look the same way or at each other.
Jewelry & accessories / Earrings
Viking Longship Charm — Earring & Pendant
Chunky stylized drakkar charm with dragon-head prow, shield row and stern spiral. 32 mm earring size plus a 45 mm pendant scale and a ready-to-print pair plate. Jump-ring bore already drilled through the mane.
Jewelry & accessories / Earrings
Luna Moth Earring — Flat Silhouette Charm
Parametric Luna moth (Actias luna) silhouette earring: broad swept forewings, the signature long curling swallowtail hindwing tails, four eyespot through-holes, tapered antennae, and a bail loop for a jump ring. Prints FLAT in one piece — zero overhangs, no supports. Symmetric, so print twice for a pair.
Jewelry & accessories / Earrings
Melting Candle Earring — 2-Color Charm
Parametric dripping wax candle earring charm — a tapered candle body with a melted pool rim, six irregular wax drips ending in bulbous drops, a teardrop flame and an integral hanging loop. Two-color for AMS: ivory wax body + orange flame as two named solids for Split-to-Parts. Prints STANDING, flame up, support-free (wide base on the bed, everything narrows upward). Print twice for a pair.
Jewelry & accessories / Earrings
Möbius Hoop Earrings — Twisted Ribbon, Prints Flat, No Supports
A hoop that is a real Möbius band: a 6 mm ribbon swept round a 30 mm circle, three half-twists. No supports.
Jewelry & accessories / Earrings
Morse Code Earring — Any Word, Reads Down
Parametric Morse-code earring: each letter becomes one horizontal row of dots and dashes, stacked top-to-bottom on a central strand so the word reads straight down the charm. Any A-Z / 0-9 word swaps in via one variable. Prints FLAT, face up, support-free — every feature is a round dot or stadium dash. 12 ready-made words included (LOVE, SOS, DREAM, STAR, ...). Symmetric, so print twice for a pair.
Jewelry & accessories / Earrings
Nudibranch Earring — 4-Color AMS Sea Slug, Print-in-One
Blue-and-orange aeolid sea slug charm, 36 mm, hanging head-up from a ring on its head. Four coordinate-locked colour solids in one STL: split to parts, assign white, blue, orange, brown, print flat with no supports.
Jewelry & accessories / Earrings
Panda Earring Charm — 2-Color AMS, Print-in-One
Seated giant-panda charm, 29.7 mm tall, sculpted with a flat back. Two coordinate-locked color solids in one STL: split to parts, assign white and black, print flat with no supports.
Jewelry & accessories / Earrings
Remembrall Memory Orb Earring — 3-Color Smoke-Gem Charm
A faceted smoke-gem memory orb as a 3-color earring charm: a translucent red glass orb wrapped by a gold equatorial band of porthole dots, with a gold hanging bail on top. Prints in one piece on an AMS / multi-material printer — drop in the combined STL and Split-to-Parts, or print the per-color STLs separately. ~14 mm orb, support-free, print twice for a pair.
Jewelry & accessories / Earrings
Chibi Seal Earring Charms — Mirrored Pair
Chubby baby-seal charm pair with built-in hanging loops — 20 mm body, mirrored left/right, prints flat on the belly with no supports. Add jump rings + ear hooks for earrings, or hang one on a chain as a pendant.
Desk & office / Reading & writing
Trident Bookmark — Poseidon's Trident with a Page Stop (2-colour)
Poseidon's trident as a bookmark: the haft IS the page strip, and the 30 mm crossbar rests on the page block so it can never sink into the book. Prints flat at 1.2 mm, no supports. Single-colour or two-colour.
Jewelry & accessories / Earrings
Viola Earring — 4-Color AMS Pansy Blossom, Print-in-One
Viola (pansy) blossom charm, 28 mm, hanging from a ring above the upper petals. Four coordinate-locked colour solids in one STL: split to parts, assign magenta, violet, yellow, dark, print flat with no supports.
Jewelry & accessories / Earrings
Ship's-Wheel Earring — Free-Spinning, Print-in-Place
A miniature ship's-wheel (helm) charm whose wheel actually spins on its bail. Printed as ONE support-free job: the wheel comes off the bed already captive on a fixed axle between a foot and a top cap. Flat print, vertical axle, so every wheel-to-frame clearance is a clean horizontal gap — no supports, no teardrop bore. Symmetric — print twice for a pair.
Jewelry & accessories / Earrings
Gothic Pigtail Girl Silhouette Earring — Flat Charm
A flat full-body silhouette of a somber girl in braided pigtails and a dark dress, sized as a dangle earring charm with an integral bail loop at the crown. Prints FLAT on its back, face up — zero overhangs, no supports. About 42 mm tall. Print twice for a pair.
Jewelry & accessories / Earrings
Zebra Earring — 2-Color AMS, Print-in-One, Both Facings
Full-body zebra drop earring, 32 mm, sculpted with a flat back and a ring lug on the crest. Two coordinate-locked color solids in one STL: split to parts, assign white and black, print flat with no supports. Ships left-facing and right-facing so a pair can look the same way or at each other.
Desk & office / Organizers / Pen Holders
Amphora Pen Pot — Panathenaic Prize Amphora, Engraved Bands, No Supports
A Greek amphora as a desk pen pot: running-athlete frieze, Greek-key meander, ray and palmette bands, all engraved 0.7 mm into the curved wall. One part, prints upright with no supports. The foot is deliberately widened over the museum original so it does not tip when a pen leans.
Desk & office / Organizers / Paper Notes
Card Holder — 8 Hero vs Villain Sandwich Pairs
2-piece sandwich card holder for a 55×85 mm card. 8 hero/villain silhouette pairs (Thor/Loki, Knight/Dragon, Red Riding Hood/Wolf, Gandalf/Balrog, Batman/Superman, Cat/Dog, Harry/Voldemort, Vader/Yoda). Friction-post fit — loose and easily disassemblable. Carabiner + keyring holes.
Kitchen / Tableware
Kiwi Bird Tea Bag Holder — feathered, beak holds the string, no supports
A sitting kiwi whose back is a bowl for the used tea bag; the long beak probes the table so you wrap the string round it and the tag stays dry. Shaggy feather relief on the body. One part, 46 x 79 x 27 mm, prints belly-down with no supports.