TAGGED
Cute
17 designs tagged “Cute”.
Jewelry & accessories / Earrings
Articulated Worm Dangle Earring — Print-in-Place Flexi Worm
A tiny ~38 mm print-in-place worm that actually wiggles and sways when worn. Five segments linked by captive teardrop ball-socket joints — printed flat, belly-down, NO supports, then flexed free. Friendly face with eyes + an engraved smile, and a flat ear loop in the bed plane so it hangs in classic worm side profile. Print twice for a pair.
Jewelry & accessories / Earrings
Dachshund Earring — 3D Wiener Dog Charm
A genuinely 3D little sausage dog charm — a plump barrel body, long snout, two floppy ears, four stubby legs and a jaunty up-curl tail, rounded on every side so it reads like a dog from any angle (not a flat relief). Prints belly-down, flat on the bed, NO supports. A jump-ring bail on the back ridge hangs it level. Single dog + a matched left/right pair STL in the download.
Jewelry & accessories / Earrings
Fiddlehead Fern Earring — Unfurling Frond Charm
A tightly coiled fiddlehead (young fern frond / crozier) as a sculpted earring charm: fine spiral ridges on the coil, delicate frond pinnae bristling along a fluted stem, and an integrated loop at the top for a jump ring. Printed and worn. Prints flat, one piece.
Jewelry & accessories / Earrings
Retro Daisy Flower Earrings — 3-Color Charm
Parametric multi-color daisy earring charm — a 6-petal flower with a half-step inner petal ring and a domed center button, all welded in one flat ~25 mm print. Hanging hole bored through the top petal. Prints flat, support-free. Ships a pre-colored 3MF (drag in, already split + colored) plus a combined STL for Split-to-Parts. Print twice for a pair.
Jewelry & accessories / Earrings
Fly Agaric Mushroom Earring — 2-Color Charm
Parametric Amanita muscaria (fly agaric) earring charm — a red domed cap with scattered white warts on a white volva stem with a drooping veil ring. Two-color for AMS: the white spots are cut as complementary dimples in the red cap, so the colors tile perfectly with no overlap and no holes through the body. Prints standing, cap up, support-free. Ships a combined STL with 2 named solids for Split-to-Parts. Print twice for a pair.
Jewelry & accessories / Earrings
Bearrings
Grizzly bear earring charms — a standing grizzly about 28 mm tall with a jump-ring bail baked into the crown so it hangs facing forward. Print a pair for earrings or one for a pendant.
Jewelry & accessories / Earrings
Luna Moth Earring — Flat Silhouette Charm
Parametric Luna moth (Actias luna) silhouette earring: broad swept forewings, the signature long curling swallowtail hindwing tails, four eyespot through-holes, tapered antennae, and a bail loop for a jump ring. Prints FLAT in one piece — zero overhangs, no supports. Symmetric, so print twice for a pair.
Jewelry & accessories / Earrings
Melting Candle Earring — 2-Color Charm
Parametric dripping wax candle earring charm — a tapered candle body with a melted pool rim, six irregular wax drips ending in bulbous drops, a teardrop flame and an integral hanging loop. Two-color for AMS: ivory wax body + orange flame as two named solids for Split-to-Parts. Prints STANDING, flame up, support-free (wide base on the bed, everything narrows upward). Print twice for a pair.
Desk & office / Organizers / Pen Holders
Owlbear Candle & Pen Holder — Chunky D&D Desk Sculpt
A round, grumpy owlbear (the classic owl-bear) as a chunky desk sculpt with a deep central bore — sized to hold a taper candle or a fistful of pens and pencils. Sculpted feathered belly, tufted ears, and a hooked beak. Prints like a vase: flat base, cavity opens up, no supports.
Jewelry & accessories / Earrings
Panda Earring Charm — 2-Color AMS, Print-in-One
Seated giant-panda charm, 29.7 mm tall, sculpted with a flat back. Two coordinate-locked color solids in one STL: split to parts, assign white and black, print flat with no supports.
Jewelry & accessories / Earrings
Phoenix Earring Charm — perched firebird (mirrored pair)
A majestic perched phoenix charm for earrings or pendants, about 32 mm tall, with a jump-ring bail baked into the nape so it hangs upright. Ships as a mirrored left/right pair so both birds face outward. Styled after a Fawkes-like firebird — a swept-back crest, swan-curved neck, folded wings and a long fanned tail that becomes the dangle.
Jewelry & accessories / Earrings
Pomeranian Dog Earring Charm
A chibi sitting Pomeranian charm for earrings or necklaces. About 24 mm tall with a jump-ring bail baked in behind the ears so it hangs facing forward. Prints standing — supports recommended.
Jewelry & accessories / Earrings
Chibi Seal Earring Charms — Mirrored Pair
Chubby baby-seal charm pair with built-in hanging loops — 20 mm body, mirrored left/right, prints flat on the belly with no supports. Add jump rings + ear hooks for earrings, or hang one on a chain as a pendant.
Jewelry & accessories / Earrings
Strix Owl Earring Charm
A finely detailed horned-owl charm for earrings or pendants, about 25 mm tall with a jump-ring bail baked into the crown. Note: the photographed pair was printed in wood-fill PLA, which is NOT recommended for a piece this small and detailed — plain or silk PLA gives far cleaner results.
Jewelry & accessories / Earrings
Gothic Pigtail Girl Silhouette Earring — Flat Charm
A flat full-body silhouette of a somber girl in braided pigtails and a dark dress, sized as a dangle earring charm with an integral bail loop at the crown. Prints FLAT on its back, face up — zero overhangs, no supports. About 42 mm tall. Print twice for a pair.
Desk & office / Organizers / Pen Holders
Hedgehog Pen & Pencil Holder — your pens become the quills
A bald little hedgehog whose quills are YOUR pens and pencils. The smooth dome body has an angled fan of 11 blind bores drilled into its back; plug pens and pencils in and they radiate outward exactly like real quills. Dimple eyes and a snout finish the face. Prints belly-flat on the bed with zero supports — the dome is the top half of an ellipsoid so every wall leans inward going up. Single part, single colour, just print and load it up.
Kitchen / Tableware
Kiwi Bird Tea Bag Holder — feathered, beak holds the string, no supports
A sitting kiwi whose back is a bowl for the used tea bag; the long beak probes the table so you wrap the string round it and the tag stays dry. Shaggy feather relief on the body. One part, 46 x 79 x 27 mm, prints belly-down with no supports.