TAGGED
Halloween
22 designs tagged “Halloween”.
Bathroom / Makeup organizers
Cauldron Makeup Organizer — a bowl with no corners, no supports
A three-legged cauldron that sorts makeup, and the bowl is the whole idea: it is a truncated sphere, so there is no corner anywhere inside it for powder to pack into. A 2.6 mm wall runs into a 3 mm floor through a 4 mm fillet rather than a crease, and one wipe reaches every part of the inside. Brushes stand in it bristles-up and fan out against the curve; a 4-way cross drops in to quarter the bowl for jars, sponges, compacts and hair ties, and lifts out to leave a plain brush cup. The three legs are a separate trivet ring the bowl drops into on a 45 degree cone, because legs cast under the bowl print as a horizontal overhang between them. 3 parts, 92 x 90 x 77 mm assembled, 117 g, no supports, no hardware, no glue — assembly is dropping one part into another.
Board games / Original games
Midnight Candy Run — Halloween family board game
A simultaneous Halloween candy hunt for 2–4 players, age 7+. Twelve rounds, three movement choices, no elimination.
Board games / Dice
Pumpkin d6 — Every Pip Is a Pumpkin, the 1 Is a Jack-o'-Lantern
A standard 20 mm six-sided die where all 21 pips are little pumpkins and the lone 1 is a carved jack-o'-lantern. Prints in two colours from a single STL — import, Split to Parts, done. No supports, no brim.
Boxes & storage / Keepsake boxes / Fantasy
Coffin Pencil Case — Magnetic Box with a Death's-Head Moth Lid
A toe-pincher coffin box for pens, markers and brushes. The lid is held by six pairs of hidden magnets buried mid-print, so no fastener is visible anywhere. Prints flat, no supports, one colour or two.
Boxes & storage / Keepsake boxes / Fantasy
Haunted Castle Magnetic Storage Box
Halloween castle storage box with a lift-off roof, hidden magnets and two printing routes: multicolour or separate parts.
Boxes & storage / Organizers / Tools & small parts
Haunted House Screw Organizer — 3 Drawer Floors, Crooked Mansard Roof
A crooked Victorian mansard house whose three floors are pull-out drawers for screws, nuts and bits. Five parts, no hardware, no glue, no supports; the pumpkin face and glowing windows are a second colour on the drawer fronts.
Boxes & storage / Keepsake boxes / Nature
Pumpkin Box — Realistic Two-Colour Lidded Pumpkin, Holds a Ø80 × 70 mm Jar
Ten-lobe pumpkin box, 131 mm wide, sculpted lobes and a gnarled green stem. Lid lifts off at the shoulder; the body swallows an 80 mm jar or candle. Two colours in one lid file, no supports. The lobes are uneven, so the lid matches the body in one rotation only.
Boxes & storage / Keepsake boxes / Fantasy
Sugar Skull Box — Calavera Trinket Box (2 Parts, No Supports)
A Day-of-the-Dead calavera trinket box that splits at the brow — the cranium lifts off as a lid. Two printed parts, slip-fit lip, no supports, no hardware. 62 × 58 × 74 mm closed, ~37 cm³ inside. Optional AMS two-colour inlay.
Jewelry & accessories / Pendants
Amber Mosquito Pendant — Mosquito Suspended Inside a Translucent Lump, 2-Colour, No Supports
A mosquito embedded inside a lump of translucent 'amber'. Two filaments, no cavity and no glue — the insect is a second solid that the slicer prints inside the first. 33 x 30 x 7.5 mm, Ø3.5 bail, prints flat with no supports. Honest warning: the inclusion reads softly, and best when the pendant is held against the light.
Around the home / Hooks
Bat Ceiling Hook — hangs by its own feet, head down, like a real bat
A roosting bat that hooks over a ceiling hook by its two toe-rings and gives you two open claw hooks at the bottom for cords, string lights or a planter. One part, no supports, no assembly.
Decorations / Sculptures
Drowned Watchman — barnacle skull, four-colour anatomical decoration
Anatomical skull that looks pulled from the seabed: a broken temple, shallow cracks, six barnacles and patches of olive growth. One 89 × 128 × 94 mm print in four PLA colours, or one colour and paint. Fixed jaw, tree supports, no assembly. Anatomy by Dr Mariano Coretti, CC BY-SA 4.0.
Jewelry & accessories / Earrings
Dino Femur Bone Earring Charm — Mirrored Pair
A tiny dinosaur femur bone charm with a built-in jump-ring loop on the upper knuckle. Ships as a mirrored pair for earrings. About 20 mm tall, prints standing with no supports. Companion to the T-rex skull charm.
Around the home / Hooks
Gargoyle Wall Hook
Gothic gargoyle head on a round backplate — wall-mounted hook for towels, rags, keys, charms. Protruding face acts as the hook; drape items over it. Two screw holes for drywall mount.
Decorations / Coasters
Halloween Coasters — six motifs that hold the glass 0.6 mm off the coaster, plus a pumpkin caddy
Ø90 mm Halloween coaster set: jack-o'-lantern, ghost, bat across a full moon, spider web, skull and cauldron. Every motif stands 0.6 mm PROUD of the drink face, so a cold wet glass rests on it with air underneath and never sticks and lifts the coaster with it. Two-colour AMS files that split into exactly two parts, a single-colour version of each, and a ribbed pumpkin caddy that stacks five fully, with the sixth above the rim. No supports anywhere.
Decorations / Seasonal
Jack-o-Lantern Fridge Magnet — LED Tealight Pumpkin
Pumpkin fridge lantern with four enclosed magnets, removable stem lid and space for a battery LED tealight.
Jewelry & accessories / Earrings
Raven Skull Earring — flat silhouette dangle, mirrored pair, no supports
A raven (Corvus corax) skull in lateral profile as a flat dangle earring: a big domed braincase pierced by an Ø8 orbit, the heavy decurved corvid culmen with an open nare, and a mandible fused only at the articulation so an open jaw slot runs the length of the beak — that slot is what makes it read as a skull rather than a bird head. One flat piece, ~25 x 41 x 1.8 mm, 0.93 g, printed face-up with zero overhangs and no supports. Ships mirrored left and right STLs so a worn pair both faces outward, and a fully parametric OpenSCAD source: size, thickness, hang angle, orbit and nare, bail hole.
Jewelry & accessories / Earrings
Spider Drop Earring — the spider actually SWINGS on its dragline
An orb web with a spider hanging below it on a dragline that is a real pivot, not a printed line. The dragline's top end is an eye captured on a post at the web hub and closed by a cap, so the spider is a free pendulum that swings side to side as you move. Print-in-place: one flat plate, two bodies, no supports, nothing to assemble. 20.0 x 40.1 x 4.9 mm, ~0.6 g. Print two for a pair.
Decorations / Sculptures
Strigoi bust — Romanian folklore vampire, one part, no supports
A strigoi — the Romanian-folklore vampire — as a small shelf bust: gaunt skull, deep-set eyes under a heavy brow, hooked nose, ears swept back to points, jaw hanging open on two long canines, and a folk-embroidered collar of cross-stitch diamonds that is the Carpathian tell separating a strigoi from a generic Dracula. 70.7 x 42.0 x 49.0 mm, one part, one colour, prints flat on its plinth with no supports, no glue and no hardware.
Jewelry & accessories / Earrings
T-Rex Skull Earring Charm — Mirrored Pair
A detailed T-rex skull charm with a built-in jump-ring loop on the cranium. Ships as a mirrored pair for earrings. About 32 mm long, prints standing with tree supports for the jaw. Companion to the dino femur bone charm.
Jewelry & accessories / Earrings
Gothic Pigtail Girl Silhouette Earring — Flat Charm
A flat full-body silhouette of a somber girl in braided pigtails and a dark dress, sized as a dangle earring charm with an integral bail loop at the crown. Prints FLAT on its back, face up — zero overhangs, no supports. About 42 mm tall. Print twice for a pair.
Decorations / Seasonal
Wizard Lantern — stained-glass LED tealight lantern with six slide-in panes
Hexagonal gothic lantern for an LED tealight: six translucent stained-glass panes slide into channels behind the windows (moon, star, potion, wizard hat, crystal, toadstool), a pointed roof clips on with two release tabs and hangs by its cord eye. 8 prints, no supports, no glue.
Kitchen / Drink Holders
Bone Tankard — skeleton cup holder with femur staves & skull
A barrel-stave tankard built from bones: 24 randomized cartoon femurs as staves, a relief skull fused into the front, and a bone-chain handle. Drop in a glass or 330 ml can. Prints upright with NO supports. Fully parametric OpenSCAD.