Board game

Board games / Terrain & dungeon tiles

Breach Dungeon Tiles — modular D&D base squares + drop-in terrain

A modular dungeon-building kit of snap-together base square tiles plus everything that drops into them: floor-texture inserts (stone, cracked ground, cobbles, rubble, fissures), wall pieces, and scatter props (chests, barrels, statues, trees, crystals). Every insert, wall and prop sits on the same 27.9 mm square base. Prints support-free. Pairs with any 28 mm minis.

Board games / Find your game / Cascadia

Cascadia Market Rack + 3D Wildlife Tokens

A two-in-one Cascadia upgrade: a market-row display rack that holds the four face-up habitat tile + wildlife token pairs on a gentle 15° slope, PLUS a full set of five sculpted 3D wildlife tokens (bear, elk, salmon, hawk, fox) that replace the flat wooden discs and drop straight into the rack's Ø19 cups. The rack prints flat and supportless in one part; each animal prints upright on a Ø18 base disc in its own colour — no AMS, no paint. Parametric OpenSCAD source included.

Board games / Classic games / Cribbage

Travel Cribbage Peg Track — Captive Slide-In Pegs, 1 to 6 Players

A pocket cribbage scorer with captive scoring pegs that can never fall out. Each player's peg rides a hidden T-channel and clicks into every score station on a self-centring ball-detent, so it always lands exactly on the number. Slide the pegs into the open end, snap the end cap on, and they are enclosed for good. One parametric design, bundled in every player count from 1 to 6.

Board games / Find your game / Dungeons & Dragons

Adventurer Dial Base — a mini base that counts your damage 0–9

A Ø36 mm miniature base with a rotating 0–9 counter ring built into it. It prints in place: the disc and the ring come off the plate already interlocked, no assembly, no hardware. A hooded wanderer figure is included — drop it in, or print the version with it welded on.

Board games / Find your game / Dungeons & Dragons

D&D Death Save Tracker — slide up for a heart, down for a skull

A flat, silent death-saving-throw tracker for D&D 5e. Three captive sliders: push one UP and a red heart fills the top window (success), push it DOWN and a white skull fills the bottom one (failure), leave it centred and both stay blank. Three hearts you're stable, three skulls you're dead — the whole table can read your state from across it. Five printed parts, no glue, no screws, no dice-sized bits to lose; everything prints flat and supportless. Parametric OpenSCAD source included.

Board games / Find your game / Frosthaven

Cassandra Rift Overlay Hex Tokens — Frosthaven / Gloomhaven (3-colour, a mini stands on it)

3D rift overlay hex tokens for Cassandra the Forgotten Diviner (Frosthaven / Gloomhaven). Each is a 38.1 mm flat-top map hex with a recessed flat central plaza a mini can stand on, ringed by a raised ornate runic frame. Three-colour AMS print: dark stone body, a magenta energy vortex flush in the plaza floor, and gold raised runes on the frame. Prints support-free — every feature steps up. Includes a fit-test coupon and the parametric OpenSCAD source.

Board games / Find your game / Frosthaven

Ghost Falcon Summon Standee with Life Dial — Frosthaven

A 37.5 mm hex standee for Cassandra's Ghost Falcon summon. The captive ring turns to show 1–4 life; the pedestal shows 2 damage, 4 health and 3 movement. One print, no assembly.

Board games / Find your game / Frosthaven

Frosthaven Lurker Deepwraith Kill Counter

Snap-together rotating dial that tracks kills through a window under a skull. Sized for the Lurker (Deepwraith) Frosthaven personal quest. Also ships a 0-9 variant for any game that wants a tiny mechanical counter.

Board games / Original games

Baby Dragons' Secret Picnic — a cooperative board game for children aged 3-8

A cooperative hidden-berry game for children from three years old. Nobody owns a dragon, nobody loses on their own, and nothing has to be remembered — every berry turned over stays face up. 1-6 players, 15-25 minutes, prints on an existing PlayGrid board.

Board games / Dice

Blank Dice — d6/d8/d12/d20 with recessed label panels

Blank d6, d8, d12 and d20 whose every face carries a recessed, chamfered panel, so a sticker or a dry-erase mark sits below the surface with no edge to catch. Numbered versions included, single-colour or two-colour from one file, plus 1:1 sticker sheets cut to the panel.

Board games / Find your game / Catan

Catan Replacement Set — Settlements, Cities, Roads, Knights, Ships & More

Hand-sculpted replacement set for Catan + Cities & Knights + Seafarers + Traders & Barbarians. 15 pieces: textured cobblestone road (thin/half/full), gabled cottage settlement, cityhall + crenellated brick wall ring, hooded robber, three escalating C&K knights (basic/strong/mighty), C&K barbarian + merchant, Seafarers galleon ship + tricorne pirate, T&B recumbent caravan camel. All silhouettes designed to print supportless on FDM.

Board games / Find your game / Catan

Catan Cities & Knights Event Die — Engraved Replacement

Cities & Knights event die (16 mm rounded d6) with 6 engraved silhouettes: 3× viking ship (barbarian advance) + 1× round tower (yellow/trade) + 1× square keep (green/science) + 1× cathedral spire (blue/politics). Paint-fill the 0.8 mm recesses or print the included inlay plugs in 4 contrast filaments for an AMS multicolour result.

Board games / Dice

Crit Dice — d6 / d12 / d20 whose top face is a sword, bow or staff

Nine dice: three solids x three glyphs. Every ordinary face is a plain numeral you read at a glance; only the crit face is a picture, so a natural 20 lands as a drawn sword instead of a number. Fair on all nine (opposite faces sum to 7 / 13 / 21). Single-colour, or two-colour from one file on an AMS.

Board games / Dice

Crooked Dice — a fair die, a gaff die and a loaded die that look identical

Three 16 mm d6 from one source: an honest die, a duplicate-face gaff showing only 5 and 6, and a die with a sealed void under the 6. Same body, same size, same weight to within a tenth of a gram. Ships the float-test cup that catches the loaded one, and states how crooked each die is as a measured number instead of an adjective — centre-of-mass offset and tipping-barrier ratio for all six faces. A magic and party prop, sold with its own counter-measure.

Board games / Dice

Custom d12 — a fair gaming die and a spindown counter, 18 mm

One 18 mm twelve-sided die in two numberings: a fair gaming d12 whose opposite faces sum to 13, and a spindown counter where every consecutive pair of numbers shares an edge so one roll of the die is one step. Prints flat on a pentagon with no supports. Single-colour for paint-fill, or two-colour on an AMS.

Board games / Dice

Custom d20 — Fair Die & Spindown Counter, 2-Colour Inlay Numbers

A parametric d20 in two numbering layouts: a FAIR gaming die (opposite faces sum to 21, apex-up digits) and a SPINDOWN life/turn counter (consecutive numbers on adjacent faces). Two-colour recessed digit inlay — print the body in one colour and the number plugs in another. Arabic / roman / letter symbols, fully editable .scad. Prints flat with a brim, no supports.

Board games / Accessories / Tokens & stands

Round-Brilliant Diamond Token — Board Game Gem (Parametric)

A faceted round-brilliant diamond as a tabletop game gem / resource token: scalloped girdle, straight crown flare to a flat table, and a stepped pavilion. Prints table-down with the culet pointing up, so it needs no supports. Parametric OpenSCAD source included — change the girdle diameter, facet count, and proportions to taste. Single gem plus a 4-up plate.

Board games / Classic games / Dominoes

Domino Box — Sleeve + Tray for the Double-Six 28-Tile Set (OpenSCAD)

Two-piece storage for a full 28-tile double-six domino set. Outer sleeve (closed on 5 faces, open on one short end) + inner tray with a Ø28 mm semicircular thumb-notch on its front wall. Tiles lie flat in a 4×2 grid of 4-tile stacks (32-slot capacity). Sleeve prints with the open mouth UP — fully supportless. Engraved decorative pip pattern on every long face. Parametric SCAD lets you re-tune tile dimensions, slop, layout (piles_x × piles_y), pip pattern, or wall thicknesses.

Board games / Classic games / Dominoes

Domino Set — Double-Six (28 tiles), 2-Colour Engraved (OpenSCAD)

Full double-six domino set: 28 tiles, 36 × 18 × 5.5 mm each, Ø2.4 mm engraved pips + centre line. Two-colour print via Bambu AMS — combined named-solid STL (Split-to-Parts) ships alongside separate body + pips STLs for non-Bambu printers. Parametric SCAD included so you can re-tune tile size, pip diameter, or face content (single-tile mode `left`/`right` lets you reprint any face).

Board games / Original games

Dragon's Nap — a co-op heist board game round a sleeping dragon, all printed

A co-op heist for 1-4. Lift gems from under a sleeping dragon whose head really turns, and get out before it wakes.

Board games / Accessories / Timers

Ticking Turn Timer — wind-up escapement, no electronics, no metal parts

A real mechanical escapement you can print: wind the knob, let go, and a foliot bar rocks tick-tick-tick while an arrow creeps back over the dial — silence means the turn is over. All 7 parts print flat and supportless; the only non-printed items are two coins used as tuning weights. NOTE: this is a mechanism demonstrator / desk toy, NOT an accurate timer — see the description.

Board games / Dice

Go-first dice — four d12 that settle the whole turn order in one fair roll

Four twelve-sided dice carrying the numbers 1-48, one each. Everyone rolls once and reads the turn order straight off the table. Ties are impossible, and every one of the 24 finishing orders is exactly equally likely, so it does not matter which die a player picks up. Works for 2 and 3 players too by leaving dice in the bag. The numbering is a solved combinatorial object and the build refuses to export unless a brute-force check over all 20736 rolls still passes.

Board games / Original games

Goblin Night Market — a print-and-play board game for PlayGrid

A fast Monopoly run by goblins. Roll, move round the loop, buy the stall you land on, pay whoever got there first — half an hour, no debt, no auctions, nobody knocked out. 2-4 players, everything printable.

Board games / Original games

Harbour Light — pocket board game in a box that is the board

Board games / Accessories / Tokens & stands

Meeple & Standee Stand Base — Friction Slot Holder for Thin Tokens (Parametric, OpenSCAD)

A weighted clip base that holds any THIN game token upright — cardboard punchboard standees, acrylic or printed silhouettes, even a card edge. The token drops into a friction slot with a flared insertion mouth; the wide footprint resists tipping in the easy-to-tip direction (across the slot). Optional vertical grip ribs pinch flimsy card so it can't flop. One slider — slot_w — tunes the slot to YOUR token thickness (~1.6 acrylic / 2.2 standard cardboard / ~7 a printed meeple slab). Prints flat, slot UP, zero supports. Single base or a batch plate.

Board games / Accessories / Tokens & stands

Meeple Set — Humans & Animals

A big set of classic wooden-style meeples: six human figures (plain worker, warrior, king, wizard, archer, axeman) in several sizes, plus eight animal pawns (cat, rabbit, dog, mouse, sheep, goat, duck, horse). Chunky flat tokens that print flat with zero supports — drop-in replacements and extras for almost any board game.

Board games / Accessories / Dice Storage

Mimic Vault — dice drawer in a monster that eats the loot

A ruined stone monument that's secretly a mimic: the front drawer is its maw and slides out to reveal your 7-die set, relief teeth grin under a translucent crystal bait pile on top. Prints upright, no supports. Includes a matching two-colour D6 with bone-femur Roman numerals.

Board games / Dice

Custom Stroke Dice — a d20 + d6 you read by counting strokes

A d20 and a d6 numbered in a custom stroke script instead of digits: strokes cut across a centre line, and where they sit plus how many there are gives the value. Nothing to memorise — count the strokes, read their angle. Prints single-colour (crisp recesses, ready for paint-fill) or two-colour on an AMS.

Board games / Original games

The Older Current — a board game for PlayGrid

A complete 2-4 player strategy game on the PlayGrid grid — board, 100 tiles, 12 figures and a box, all included. You never move your own people; you re-aim the current that carries them.

Board games / Dice

Pasa — Indian long dice, the d4 you can actually roll

A long die: a square rod marked on its four long sides and capped at both ends so it can never stand up. You roll it like a pencil and read the number on top. Ships the traditional Chaupar/Pachisi stave (faces 1-2-5-6) and a plain 1-2-3-4 version, each in one colour and as a two-colour Split-to-Parts file. 62 x 10 x 10 mm, flat on the bed, no supports. The opposite-face pairing is chosen to MINIMISE bias, not to sum to seven — 4.1x less centre-of-mass offset, and the two-colour build cancels it entirely.

Board games / Dice

Pumpkin d6 — Every Pip Is a Pumpkin, the 1 Is a Jack-o'-Lantern

A standard 20 mm six-sided die where all 21 pips are little pumpkins and the lone 1 is a carved jack-o'-lantern. Prints in two colours from a single STL — import, Split to Parts, done. No supports, no brim.

Board games / Dice

Emoji Reaction Die — a mood d6 that replaces the RPG reaction roll

One 18 mm d6 with six emoji faces on a HOSTILE → HELPFUL ladder. Roll it when the party meets an NPC and read the attitude straight off the top face — no 2d6 lookup table, no maths. Opposite faces hold opposite attitudes. Three interchangeable face styles in the box (geometric, emoji-glyph, cartoon) and every style ships as a two-colour combined STL with the faces as flush inlays, plus a single-colour version with paint-fillable recesses. Prints on any face, no supports.

Board games / Dice

Parametric Rounded D6 — Numbers / Roman / Letters (OpenSCAD)

Six-sided die with softly-rounded edges. Three ready-to-print STL variants (Arabic 1-6, Roman I-VI, Letters A-F) plus the OpenSCAD source for any custom face-set (unicode, up to 3 chars per face).

Board games / Dice

Rune Die — a d6 numbered in real runic numerals

A 16 mm d6 whose faces carry the six runes the Norse actually used as the numbers 1 to 6 — genuine numerals from the runic calendar, not letters standing in for digits. Prints single-colour for paint-fill, or two-colour on an AMS from one file.

Board games / Find your game / Dungeons & Dragons

Spell-Slot Abacus — print-in-place D&D spell-slot tracker

A print-in-place abacus for tracking D&D spell slots: 9 rails (spell levels 1–9) of captive sliding crystal beads (4/3/3/3/3/2/2/1/1 = full-caster max). Slide a bead to burn a slot, sweep back on a long rest. A tilt-lock detent at mid-span keeps the count from scrambling when you pick the board up. ~107 × 130 × 8 mm, zero supports.

Board games / Dice

Teetotum Set — Spinning-Top Dice (d6 · d8 · d10 · d12, 2-Colour)

The pre-dice gambling top, four ways: spin it, let it topple, read the up-facing number. d6/d8/d10/d12, each a 2-colour print with a modelled break-away support that peels off clean — no scars, no slicer supports.

Board games / Dice

Tengwar d6 — a 20 mm die numbered in elvish duodecimal numerals

A 20 mm six-sided die whose pips are replaced by authentic Tengwar duodecimal numerals. Opposite faces sum to 7 and the 1-2-3 corner is the standard right-handed arrangement, so it rolls like any ordinary d6 — it just reads elvish. Print it single colour and paint-fill the recesses, or drop in the coordinate-locked numeral plugs for a two-colour AMS print. Printed and verified.

Board games / Original games

The Answering — a co-operative board game for PlayGrid

A complete 1-4 player co-op game on the PlayGrid grid — 28 figures, 17 tiles, a die and its tower, all included. The swarm never takes a turn of its own. It answers yours.

Board games / Original games

The Everfruit Vale — a competitive and cooperative board game for PlayGrid

A tile-laying game with two modes in one box. Draft from four face-up tiles, place two a turn, and plant Grovekeepers in the root networks you want to score. Competitive for 2-4 or cooperative for 1-4, 35-50 minutes, on an existing PlayGrid 10x10 board.

Board games / Original games

Watchfires — a stacking board game of beacons for 2–4, all printed

A stacking game of beacons for 2-4. Every ring you place is a watchman who counts the towers he can see.

Board games / Find your game / Magic: The Gathering / Counters

MTG — Amass Army Dial (0–15, goblin knob)

A two-part rotating counter for a single growing Army token. Only ONE number is ever visible, through a window in the fixed cap, so it reads like a tally slate rather than a clock face. Thumb on the goblin holds the cap, fingers turn the scalloped rim, every number lands with a detent click. Two printed parts, no glue, no hardware, no supports.

Board games / Find your game / Magic: The Gathering / Counters

MTG — Mana Barrel Counter (3-Drum Hex Dial)

Three-digit (0-999) rotating barrel counter for Magic: the Gathering — hex prism with three independently-rotating drums, capped at each end by a hex cap engraved with the chosen mana symbol (W/U/B/R/G or colourless). Caps lock to a shared square axle so the drums rotate but the caps don't. Engraved digits + mana symbols print as 2-AMS Bambu Split-to-Parts. ~50 mm tall, no supports, PLA.

Board games / Find your game / Magic: The Gathering / Deck boxes & card care

MTG Deck Box with Mana Symbol Lid

Simple cap-lid deck box for sleeved Commander-sized MTG decks. Lid has an embossed mana symbol (WUBRG); optional second-color inlay STL for two-colour AMS printing.

Board games / Find your game / Magic: The Gathering / Tokens

MTG City's Blessing — Ornate Citadel Emblem

Highly detailed citadel emblem for Magic: The Gathering's City's Blessing Ascend mechanic. Print in metallic gold (the original was Bambu metallic PLA) and seat on any small disc base to track when you have 10+ permanents.

Board games / Find your game / Magic: The Gathering / Counters

MTG — Creature Token Tracker (P/T Wheels + Type & Ability Tiles)

A card-side dashboard for tracking a single Magic: the Gathering creature token. Two flat 0–9 spin-wheels show Power / Toughness; a row of side-loading tiles behind them name the creature's TYPE and its keyword ABILITIES. Includes the token chassis + snap-on lid + two-colour digit wheel, a storage box with engraved mana-symbol lid, and the full set of 47 creature-type tiles and 42 keyword-ability tiles. Engravings print as 2-AMS Bambu Split-to-Parts, or single-colour. No supports; print the token chassis + lid in PETG (the snap pins), everything else in PLA.

Board games / Find your game / Magic: The Gathering / Tokens

MTG — Day / Night Flip Token (60mm Disc)

60 mm two-sided flip token for the Day/Night mechanic in Magic: the Gathering. Sun (with 12 radiating rays) on the day face; crescent moon + 3 stars on the night face. Flip the token whenever a card transitions Day↔Night so the current state is always visible. Two-colour AMS print: dark body + gold engravings.

Board games / Find your game / Magic: The Gathering / Tokens

MTG — Food · Blood · Clue Artifact Token Set

A set of three 3D artifact tokens for Magic: the Gathering, replacing the cardboard punch-outs: FOOD as a realistic lattice pie, BLOOD as a faceted gem-cut drop, and CLUE as a detective's magnifying glass. Each token prints flat, supportless, in one colour (or paint the details). ~22–30 mm, PLA. Parametric OpenSCAD source included.

Board games / Find your game / Magic: The Gathering / Counters

MTG Mana Counter Set — 6 colors, twin-dial

Snap-together MTG mana / life counters, one per colour (W U B R G C). Twin dials behind a window track 0-99 with a thumb-twist on the exposed dial rim. Two-colour AMS print, no fasteners.

Board games / Find your game / Magic: The Gathering / Deck boxes & card care

Mana Press — screw press for Magic cards: flatten a bowed deck, brick a freshly sleeved one

A printed screw press for Magic cards. Two threaded posts, a yoke and two thumb nuts squeeze a stack flat overnight, or squeeze a freshly sleeved deck back into a brick that drops into its box. The posts ARE the screws — there is no hardware anywhere in the model, no screws, magnets or inserts. Height is set by stacking 12 mm pressure plates, which double as the WUBRG mana rainbow and each ship a named-solid 2-colour companion for AMS. An optional, experimental arc pair over-bends a curled foil past its set. 11 STLs, 6 printed parts, no supports, fully parametric OpenSCAD.

Board games / Find your game / Magic: The Gathering / Counters

MTG — Map Token Counter (1-10 Compass Dial)

Physical MTG Map artifact token that doubles as a 1-10 counter, styled as a pocket compass. 56 mm two-colour face with numerals, tick ring and engraved compass rose. The two-tone needle presses over the centre post ONCE and clicks captive — then spins freely forever. Bambu AMS-friendly (split-to-parts named solids).

Board games / Find your game / Magic: The Gathering / Tokens

Marit Lage 20/20 Token — MTG flat-card display plinth with eldritch sculpt + multicolour text

A display plinth for the Marit Lage token from Magic: The Gathering (Dark Depths) — laid out like a Magic card lying flat (≈90 × 60 mm, low 4 mm base). A colossal Lovecraftian tentacle sculpt sits as the 'art', RAISED multicolour text reads MARIT LAGE on top, INDESTRUCTIBLE / FLYING in front of the art, and a big 20/20 power/toughness on the front vertical wall. Prints flat, plinth-on-bed, creature up — supportless. Ships as ONE combined STL with named solids for Bambu 'Split to Parts': one per BLOCK (combined) or one per CHARACTER (chars) for clean per-letter AMS colouring with zero accent bleed.

Board games / Find your game / Magic: The Gathering / Tokens

Monarch Crown Token (MTG) — 3-Colour Heraldic Crown, OpenSCAD

Heraldic crown token for the Monarch mechanic in Magic: The Gathering. Slow-cylinder bell band + 7 tall triangular spikes alternating with 7 short crenel spikes, Ø5 mm orb finials on each tall tip. "MONARCH" wraps around the band as inset 2-colour text. 3-colour print via Bambu AMS — combined named-solid STL (Split-to-Parts) ships alongside per-filament STLs.

Board games / Find your game / Magic: The Gathering / Tokens

MTG — Pact Reminder Token (YOU WILL PAY Scroll)

Medieval-scroll reminder token for Magic: the Gathering. Drop in front of an opponent who owes you a Pact upkeep (Pact of Negation, Slaughter Pact, Intervention Pact, Pact of the Titans, Summoner's Pact) or anyone trying to skip a delayed cost. 55×80 mm slim slab with raised parchment-roll ridges top + bottom and 'YOU WILL PAY' in raised medieval lettering. Two-colour AMS print: parchment body + ink letters.

Board games / Find your game / Magic: The Gathering / Counters

MTG — +1/+1 Counter Die (d6, +N/+N Faces)

A 16 mm six-sided creature counter die for Magic: the Gathering. Each face engraved with +N / +N (power / toughness) — values 1 through 6, opposite faces sum to 7. Two-colour Bambu AMS print: dark body + bright '+N' digits via Split-to-Parts.

Board games / Find your game / Magic: The Gathering / Tokens

MTG Powerstone Token — Flip-to-Tap Crystal

Chunky 60 × 30 × 16 mm faceted crystal token for Magic: the Gathering's Powerstone artifacts. It rests flat on either octagonal face: plain side up is untapped, tap-arrow side up is tapped. Flip it instead of rotating it. Prints as one part with no supports.

Board games / Find your game / Magic: The Gathering / Counters

MTG — The Ring Tempts You Tracker (Barad-dûr Plaque)

Two-piece tracker for the LotR Ring mechanic. Tower-of-Sauron silhouette plaque with 4 detent pockets (Levels I–IV) + ability label inset beside each in a second filament colour, plus a small One-Ring marker that the active player places in the current level. ~130 mm tall, prints flat, no supports. Bambu AMS 2-colour: dark body + gold labels.

Board games / Find your game / Magic: The Gathering / Counters

MTG — Saga Chapter Dial (I / II / III / IV) with Snap-Fit Pointer

Ornate 4-chapter dial for tracking which chapter (I, II, III, IV) of a Saga enchantment you're on. Two-colour 55 mm disc with engraved laurel-wreath border + Roman numerals; separate pointer snap-fits onto the centre post and rotates freely. Bambu AMS-friendly (split-to-parts named solids).

Board games / Find your game / Magic: The Gathering / Counters

MTG Treasure Token Chest — print-in-place pirate chest counter (1-6)

A working pirate chest that IS your MTG Treasure counter: friction-fit gold coins stand edge-up in six slots and the number standing is the count (1-6). Real print-in-place barrel lid on a piano hinge — closes with all six coins seated. Coins print separately in gold. Includes a brand-neutral GEM coin too, so the same chest doubles as a loot/gold tracker for D&D and any dungeon-crawler.

Board games / Find your game / Magic: The Gathering / Tokens

MTG Undercity Dungeon — Hex pyramid prop

Physical play prop for the MTG Undercity dungeon (Commander Legends: Baldur's Gate). 9 hex rooms with engraved effects, doors on the canonical 12 connections, peg-mounted player pins. Two-colour AMS-friendly.

Board games / Find your game / Spirit Island

Dahan — Spirit Island Tribal Hut Token (2-Colour, AMS Split-to-Parts)

Spirit Island dahan tokens shaped like a Pacific-Islander tribal hut — woven body with low-relief door + tall conical thatched roof, Ø22 × 20 mm. Ships as a 2-named-solid combined STL (import → Split to Parts in Bambu Studio) for a 2-AMS-colour print (thatch tan + wall brown). Per-half binary STLs included for single-colour or mono-extruder users.

Board games / Find your game / Spirit Island

Spirit Island Energy Counter (0-20 Dial)

Snap-together rotating dial that tracks per-player energy (0..20) through a window under the eight Spirit Island element glyphs. Two physical parts, four STLs, two filaments via Bambu AMS.

Board games / Find your game / Spirit Island

Spirit Island Tokens — Amateur Set (5 pieces, two-color)

Five simple fan-made Spirit Island board-game tokens (Beast, Wilds, Mountain, Strife, Beasts/Paw) designed in OpenSCAD for Bambu Lab AMS two-color printing. Rough and beginner-quality — functional, not display-grade.

Board games / Find your game / Terraforming Mars

Terraforming Mars Track Figures — Biodome, Reactor, Rover

Three sculpted markers for the Terraforming Mars tracks: a greenhouse biodome for oxygen, a fluted cooling tower for temperature and a six-wheel rover for generation. Each is one solid print on a Ø12 mm base, upright with no supports, no assembly and no hardware — about 2.2 g of PLA for the whole set. Print one filament per figure; they replace the game's ordinary markers on its existing printed tracks.

Board games / Find your game / Wingspan

Wingspan Card Holder — 3 Slots, Bird Silhouettes

3-slot tilted-back card holder for Wingspan bird cards (or any 55×90 mm sleeved card). Each cell has a different bird silhouette (kiwi / sparrow / eagle) on its back wall — revealed when the card is removed.

Board games / Find your game / Wingspan

Wingspan Dice Nest Tray — Twig-Clad Bird's Nest Dice Tray

Dice tray for Wingspan (or any tabletop game) shaped like a woven bird's nest outside, rectangular cavity inside. 600 randomly-placed twig cylinders, no supports, no hardware.

Board games / Find your game / Wingspan

Wingspan Twigs Nest — Stadium-Shaped Bird's Nest Dice Tray

Shallow stadium-shaped dice tray for Wingspan (or any board game) shaped like a real woven bird's nest. ~1100 procedural perimeter twigs sweep continuously around the perimeter; ~800 short pillars in the saucer interior recreate a pebble/twig floor texture. No supports, no hardware.