TAGGED
Fantasy
16 designs tagged “Fantasy”.
Bathroom / Makeup organizers
Dragon Wing Palette Rack — eyeshadow palettes on edge, no supports
An eyeshadow-palette rack whose fins are the finger bones of a dragon wing. Palettes stand on edge like books, so you read the spines and pull one out one-handed instead of excavating a stack. Five 16.5 mm slots take anything up to an 18 mm palette, with 100 mm of clear depth between the front rail and the back spine and a 76 mm shortest fin. Every segment of the fin profile is upward-facing, so a 112 mm tall part prints with ZERO supports. 1 part, 118 x 128 x 112 mm, no supports, no hardware, no assembly.
Bathroom / Makeup organizers
Medieval Well Makeup Organizer — no supports
A stone draw-well with a winding gantry, a gable roof and a bucket on a string — and a makeup organizer inside it. The coping stone is a lift-off plate carrying all 11 bores, and not one of them is blind: a brush handle hangs free down the shaft, a mascara rests in a 45° seat cone instead of bottoming out, and loose powder falls straight past into a rinse dish in the plinth. Cleaning is lift, lift, tip, rinse. 5 parts, Ø144 × 176 mm, 420 g, no supports, no hardware, no glue — just ~120 mm of twine for the bucket.
Board games / Terrain & dungeon tiles
Breach Dungeon Tiles — modular D&D base squares + drop-in terrain
A modular dungeon-building kit of snap-together base square tiles plus everything that drops into them: floor-texture inserts (stone, cracked ground, cobbles, rubble, fissures), wall pieces, and scatter props (chests, barrels, statues, trees, crystals). Every insert, wall and prop sits on the same 27.9 mm square base. Prints support-free. Pairs with any 28 mm minis.
Boxes & storage / Keepsake boxes / Fantasy
Elven Motif Keepsake Box — vesica plan, interlaced vine walls, two-colour leaf inlay
A pointed-oval trinket box where every ornament is the same shape at three scales: the box plan, the leaves woven into the wall braid, and the veined leaf inlaid in the lid. The wall vine is a genuine over-and-under interlace, not two sine waves. Two printed parts, no supports, no hardware, no glue — and the two-colour lid costs about 1 g of purge because all the ink sits in three layers.
Boxes & storage / Keepsake boxes / Fantasy
Potion of Holding — Twist-Lock Flask Organizer (2 sizes)
A fantasy potion flask that twist-locks apart into a wide-mouth bin with a 4-way divider — four sorted compartments for screws, bolts, beads, pills, or tiny treasure. A friction cork plugs the neck. Two sizes from the same design: a full-size desk organizer and a mini that fits inside a 2.7-inch gacha capsule.
Around the home / Hooks
Cerberus leash hook — three-headed hellhound wall plaque with hidden magnets
A three-headed hellhound wall plaque where each open jaw is a hook. Five magnets sit fully sealed inside the body, dropped in at a print pause, so the back face is one unbroken plane with no bores, no glue and nothing to fall out.
Jewelry & accessories / Jewelry displays
Sleeping Dragon Ring Holder — crystal spire, 3 colours, no supports
A small dragon asleep in a coil around a crystal spire on a rock. Rings slide over the crystal and rest on the dragon's back. Three separate prints in three colours that drop together with no glue and no hardware, or one print-in-place 3-colour file for an AMS. 53 x 53 x 64 mm, about 46 g, no supports.
Around the home / Hooks
Gargoyle Wall Hook
Gothic gargoyle head on a round backplate — wall-mounted hook for towels, rags, keys, charms. Protruding face acts as the hook; drape items over it. Two screw holes for drywall mount.
Desk & office / Organizers / Pen Holders
Owlbear Candle & Pen Holder — Chunky D&D Desk Sculpt
A round, grumpy owlbear (the classic owl-bear) as a chunky desk sculpt with a deep central bore — sized to hold a taper candle or a fistful of pens and pencils. Sculpted feathered belly, tufted ears, and a hooked beak. Prints like a vase: flat base, cavity opens up, no supports.
Jewelry & accessories / Earrings
Phoenix Earring Charm — perched firebird (mirrored pair)
A majestic perched phoenix charm for earrings or pendants, about 32 mm tall, with a jump-ring bail baked into the nape so it hangs upright. Ships as a mirrored left/right pair so both birds face outward. Styled after a Fawkes-like firebird — a swept-back crest, swan-curved neck, folded wings and a long fanned tail that becomes the dangle.
Jewelry & accessories / Earrings
Remembrall Memory Orb Earring — 3-Color Smoke-Gem Charm
A faceted smoke-gem memory orb as a 3-color earring charm: a translucent red glass orb wrapped by a gold equatorial band of porthole dots, with a gold hanging bail on top. Prints in one piece on an AMS / multi-material printer — drop in the combined STL and Split-to-Parts, or print the per-color STLs separately. ~14 mm orb, support-free, print twice for a pair.
Jewelry & accessories / Earrings
Strix Owl Earring Charm
A finely detailed horned-owl charm for earrings or pendants, about 25 mm tall with a jump-ring bail baked into the crown. Note: the photographed pair was printed in wood-fill PLA, which is NOT recommended for a piece this small and detailed — plain or silk PLA gives far cleaner results.
Decorations / Clocks
Tengwar Wall Clock — Elvish Duodecimal Numerals
A Ø200 mm round wall clock with twelve authentic Tengwar duodecimal hour numerals and elvish leaf-blade hands. A real clock, not a flat disc: an integrated standoff back wall hides the quartz movement and a rear deep-channel keyhole hangs it on a single ordinary wall screw. Numerals + ticks can be paint-filled or printed as second/third AMS colours. Prints face-down, no supports.
Decorations / Magnets
Wizard Figurine — robed mage with a magnet hand
A robed wizard figurine with a pointed wide-brim hat, long beard and one hand raised in greeting. The raised hand has a recessed slot for a small disc magnet, so he can hold a metal wand, pin or trinket. It is NOT a fridge magnet — the figure will not stick to a fridge, and the little magnet is weak, so think of it as a charming desk or shelf wizard with a handy magnetic hand. Ships as an STL plus a ready-to-slice Bambu .3mf.
Decorations / Sculptures
Gothic Stone Throne — decorative sculpture
A miniature gothic stone throne: a spired skull-and-scroll backrest, sweeping wave/dragon-wing armrests, and a stepped rune plinth. ~143 × 146 × 211 mm — a chunky display sculpture for a desk, shelf, or D&D table. Prints as one solid watertight body.
Desk & office / Organizers / Pen Holders
Wizard Tower Pen Holder — fantasy castle desk organizer
A squat stone wizard's tower that holds your pens and pencils. Crenellated battlement crown, spiral arrow-slit windows and a flared buttressed base; the bored centre well swallows a fistful of pens so they jut out the top like spires. Prints upright, no supports, fully parametric.