TAGGED
Pen holder
12 designs tagged “Pen holder”.
Bathroom / Makeup organizers
Great Helm Makeup Organizer — knight's helm, no supports
A 13th-century flat-topped great helm that is a makeup organizer on the inside. The crown is open and a lift-out liner drops onto the rim carrying the whole bore field, so brushes stand out of the helm like a crest: six brush bores go straight THROUGH so the handle hangs in the cavity and a 120 mm and a 220 mm brush stand at the same height, three tube bores (Ø27 mascara, two Ø23 lipstick) neck down instead of bottoming out, and an 88 × 24 mm palette slot rests a compact on an open 8 mm ledge. Not one bore is blind, so powder falls through into a smooth drum you tip out and rinse. 2 parts, 134 × 125 × 150 mm, 307 g, no supports, no hardware, no glue.
Bathroom / Makeup organizers
Medieval Well Makeup Organizer — no supports
A stone draw-well with a winding gantry, a gable roof and a bucket on a string — and a makeup organizer inside it. The coping stone is a lift-off plate carrying all 11 bores, and not one of them is blind: a brush handle hangs free down the shaft, a mascara rests in a 45° seat cone instead of bottoming out, and loose powder falls straight past into a rinse dish in the plinth. Cleaning is lift, lift, tip, rinse. 5 parts, Ø144 × 176 mm, 420 g, no supports, no hardware, no glue — just ~120 mm of twine for the bucket.
Boxes & storage / Keepsake boxes / Fantasy
Coffin Pencil Case — Magnetic Box with a Death's-Head Moth Lid
A toe-pincher coffin box for pens, markers and brushes. The lid is held by six pairs of hidden magnets buried mid-print, so no fastener is visible anywhere. Prints flat, no supports, one colour or two.
Desk & office / Organizers / Pen Holders
Owlbear Candle & Pen Holder — Chunky D&D Desk Sculpt
A round, grumpy owlbear (the classic owl-bear) as a chunky desk sculpt with a deep central bore — sized to hold a taper candle or a fistful of pens and pencils. Sculpted feathered belly, tufted ears, and a hooked beak. Prints like a vase: flat base, cavity opens up, no supports.
Desk & office / Organizers / Pen Holders
Amphora Pen Pot — Panathenaic Prize Amphora, Engraved Bands, No Supports
A Greek amphora as a desk pen pot: running-athlete frieze, Greek-key meander, ray and palmette bands, all engraved 0.7 mm into the curved wall. One part, prints upright with no supports. The foot is deliberately widened over the museum original so it does not tip when a pen leans.
Desk & office / Organizers / Pen Holders
Hedgehog Pen & Pencil Holder — your pens become the quills
A bald little hedgehog whose quills are YOUR pens and pencils. The smooth dome body has an angled fan of 11 blind bores drilled into its back; plug pens and pencils in and they radiate outward exactly like real quills. Dimple eyes and a snout finish the face. Prints belly-flat on the bed with zero supports — the dome is the top half of an ellipsoid so every wall leans inward going up. Single part, single colour, just print and load it up.
Desk & office / Organizers / Paper Notes
Paper Block Desk Organizer — Sticky-Note Tray + Pen/Scissor Column + Slot
Three-zone desk organizer: thin slot for a phone or notebook on the left, a 90 × 90 mm paper-pad well in the middle (tall back, sloped sides, low front lip with finger-gap), and a pen/scissor column on the right with two-color pencil + scissors icon inlays.
Desk & office / Organizers / Pen Holders
Sunflower Pen Cup — Petal Crown + Gothic Quatrefoil Body
Tall pen / marker cup with an 18-petal sunflower crown at the rim and a brick-grid of gothic quatrefoils (cathedral-rose pattern) engraved into the body wall. Single open chamber, prints upright without supports.
Desk & office / Organizers / Pen Holders
Retro Tape Deck Desk Caddy — pen cups, phone dock, pull-out cassette drawer + swappable spine labels
A 1980s stereo cassette deck that is actually a desk organiser. Two 52 mm-deep pen cups, a catch-all tray, a tilted phone cradle with a cable pass-through, and a pull-out 'cassette' drawer whose spine label is a card you thread in sideways and swap. 9 spare captions on one sheet — or letter your own straight from the parametric OpenSCAD source. 3 printed parts, no hardware, no glue, no supports.
Desk & office / Organizers / Pen Holders
TARDIS Pen Cup — Police Box Storage Container
Doctor Who TARDIS / classic English police telephone box. Two-color pen holder with removable roof cap.
Desk & office / Organizers / Pen Holders
Twisted Ribbed Pen Cup — one part, no supports
A rounded-square desk cup whose whole surface is fine ribs turning through 90 degrees from the base to the rim. The cavity twists at the same rate as the shell, so the wall stays 1.6 mm the whole way up and nothing inside collects dust in a corner. 50 x 50 x 70 mm, 63 mm across the twisted corners, about 40 g, one part, no supports, no glue. Parametric OpenSCAD source included — twist angle, rib pitch, rib depth, corner radius and height are all named variables at the top.
Desk & office / Organizers / Pen Holders
Wizard Tower Pen Holder — fantasy castle desk organizer
A squat stone wizard's tower that holds your pens and pencils. Crenellated battlement crown, spiral arrow-slit windows and a flared buttressed base; the bored centre well swallows a fistful of pens so they jut out the top like spires. Prints upright, no supports, fully parametric.